Got a Pick N Place..
- Contract_Pilot
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 79
- Thank you received: 11
25 Jul 2023 16:44 #276236
by Contract_Pilot
Got a Pick N Place.. was created by Contract_Pilot
Please Log in or Create an account to join the conversation.
- tommylight
- Away
- Moderator
Less
More
- Posts: 19110
- Thank you received: 6401
27 Jul 2023 12:38 #276372
by tommylight
Replied by tommylight on topic Got a Pick N Place..
I would check how hard it is to use as is, then decide, but knowing myself pretty good, i would retrofit in a heartbeat!
Having retrofitted plenty of big machines, i might be biased... or not, i like the flexibility and the ability to set things my way for almost everything, hal is a powerful tool.
Having retrofitted plenty of big machines, i might be biased... or not, i like the flexibility and the ability to set things my way for almost everything, hal is a powerful tool.
Please Log in or Create an account to join the conversation.
- my1987toyota
- Offline
- Platinum Member
Less
More
- Posts: 812
- Thank you received: 329
27 Jul 2023 22:50 #276409
by my1987toyota
Replied by my1987toyota on topic Got a Pick N Place..
If it were me I would run as is to get a base line and see if I could tolerate it. Were I work also has multiple Neoden yy1
the feeders can be a pain sometimes so it's not a set it and forget it type of device.
the feeders can be a pain sometimes so it's not a set it and forget it type of device.
Please Log in or Create an account to join the conversation.
Time to create page: 0.083 seconds