ArtcamPro 2011 - which post processor to use
- SSIRon
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 4
04 Nov 2021 20:41 #225262
by SSIRon
ArtcamPro 2011 - which post processor to use was created by SSIRon
I am using artcam pro ver 2011 with mach3 but converting to linux cnc. does anyone have any experiance with artcam /linuscnc and any suggests as to which which post processor should be used.
Please Log in or Create an account to join the conversation.
- aleksamc
-
- Offline
- Platinum Member
-
Less
More
- Posts: 567
- Thank you received: 65
17 Nov 2021 17:18 #226765
by aleksamc
Replied by aleksamc on topic ArtcamPro 2011 - which post processor to use
mach3 postprocessor is enough in default questions.
But I edited this postprocessor for my needs. For example I turn on G64 P<precision>.
But I edited this postprocessor for my needs. For example I turn on G64 P<precision>.
Please Log in or Create an account to join the conversation.
- SSIRon
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 4
17 Nov 2021 18:24 #226770
by SSIRon
Replied by SSIRon on topic ArtcamPro 2011 - which post processor to use
OH - cant tell you how pleased i was to see this. Thank you so much.
Please Log in or Create an account to join the conversation.
- aleksamc
-
- Offline
- Platinum Member
-
Less
More
- Posts: 567
- Thank you received: 65
19 Nov 2021 10:55 #226966
by aleksamc
Replied by aleksamc on topic ArtcamPro 2011 - which post processor to use
Look in installation folder of artcam/postp
Please Log in or Create an account to join the conversation.
Time to create page: 0.065 seconds