Sheetcam with post processor PlasmaC version 0.5
- aabtech
-
Topic Author
- Offline
- Premium Member
-
Less
More
- Posts: 110
- Thank you received: 13
04 Jan 2023 04:20 #260893
by aabtech
Sheetcam with post processor PlasmaC version 0.5 was created by aabtech
hi, how to get Sheetcam with post processor PlasmaC version 0.5?
Please Log in or Create an account to join the conversation.
- rodw
-
- Offline
- Platinum Member
-
Less
More
- Posts: 10737
- Thank you received: 3540
04 Jan 2023 07:33 #260899
by rodw
Replied by rodw on topic Sheetcam with post processor PlasmaC version 0.5
There is a postprocessor for plasmac included with Sheetcam as standard. Please read the post comments as there are some settings you can change.
Please Log in or Create an account to join the conversation.
Time to create page: 0.044 seconds