QtPyVCP Mill Touch V6
18 Apr 2019 15:46 - 18 Apr 2019 15:47 #131168
by BigJohnT
QtPyVCP Mill Touch V6 was created by BigJohnT
I got distracted for a while working out thread milling for my GUI but got all that sorted out now and back to refining my design for my BP mill. Here is a short clip showing the conversational part of the GUI. It looks better when viewed on PuTube lol.
JT
JT
Last edit: 18 Apr 2019 15:47 by BigJohnT.
Please Log in or Create an account to join the conversation.
19 Apr 2019 06:40 #131221
by pl7i92
Replied by pl7i92 on topic QtPyVCP Mill Touch V6
lots of buttons and small infos
you need better glases soon
you need better glases soon
Please Log in or Create an account to join the conversation.
19 Apr 2019 09:55 #131232
by emilvv
Replied by emilvv on topic QtPyVCP Mill Touch V6
Hi,
Is it possible to make X Y Z digits bigger .... ? To see them from 1-2 m distance ...
Emil
Is it possible to make X Y Z digits bigger .... ? To see them from 1-2 m distance ...
Emil
Please Log in or Create an account to join the conversation.
19 Apr 2019 13:28 #131234
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Mill Touch V6
Sure.
JT
JT
Please Log in or Create an account to join the conversation.
19 Apr 2019 14:58 #131235
by KCJ
Replied by KCJ on topic QtPyVCP Mill Touch V6
JT, amazing work! Can't wait to try it out on a real machine.
Please Log in or Create an account to join the conversation.
19 Apr 2019 17:15 #131251
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Mill Touch V6
Thanks, got internal single point thread milling done a while ago, just a few more of the conversational items left to sort out. You might want to keep in the back of your mind that there is NO error checking for the conversational at this time other than when you try and run the G code.
JT
JT
Please Log in or Create an account to join the conversation.
26 Apr 2019 00:07 #131907
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Mill Touch V6
I've been using Mill Touch V6 on the BP for a short while and I'm liking what I have.
github.com/jethornton/mill_touch_v6
Any feedback is welcome.
JT
github.com/jethornton/mill_touch_v6
Any feedback is welcome.
JT
Please Log in or Create an account to join the conversation.
11 Jul 2019 19:21 #139120
by Ross77
Replied by Ross77 on topic QtPyVCP Mill Touch V6
I have tried to install this but the terminal isn't accepting the git clone command
bash: git: command not found.
The pyqt5.qtsql installed fine.
Running fresh install of Debian stretch
bash: git: command not found.
The pyqt5.qtsql installed fine.
Running fresh install of Debian stretch
Please Log in or Create an account to join the conversation.
11 Jul 2019 19:55 #139122
by BigJohnT
Replied by BigJohnT on topic QtPyVCP Mill Touch V6
You need to install git.
sudo apt install git
or open the synaptic package manager and install git
I keep forgetting that git is not installed by default...
JT
sudo apt install git
or open the synaptic package manager and install git
I keep forgetting that git is not installed by default...
JT
Please Log in or Create an account to join the conversation.
11 Jul 2019 20:53 #139125
by Ross77
Replied by Ross77 on topic QtPyVCP Mill Touch V6
Thanks, that's got me a step closer but its still failing to open
.
Ive copied the config files to the linuxcnc config folder and edited the Ini file but nothing. I even tried opening the ini file in the Mill_touch_v6 folder.
Sorry complete noob
.
Ive copied the config files to the linuxcnc config folder and edited the Ini file but nothing. I even tried opening the ini file in the Mill_touch_v6 folder.
Sorry complete noob
Please Log in or Create an account to join the conversation.
Time to create page: 0.111 seconds