QtPyVCP - Probe Basic Vertical

Start
Prev
1
Next
End

OpenDev
Topic Author
Offline
New Member

06 Apr 2021 10:18 - 06 Apr 2021 10:18 #205061 by OpenDev

QtPyVCP - Probe Basic Vertical was created by OpenDev

Hello

Have Linuxcnc 2.8.1 with Probe Basic v0.3.4 running and working. So far so good.

But i want to try Probe Basic Vertical... but there is no sample config..

i have done the compiling:

qcompile home/cnc/probe_basic/probe_basic_vertical

what now?

Last edit: 06 Apr 2021 10:18 by OpenDev.

The following user(s) said Thank You: Lcvette

Please Log in or Create an account to join the conversation.

Lcvette
Offline
Moderator

06 Apr 2021 14:41 #205122 by Lcvette

Replied by Lcvette on topic QtPyVCP - Probe Basic Vertical

Vertical is out of date and requires major updating, probably not going to happen in the immediate future as I'm focused on lathe and conversational at the moment. Unless someone wants to jump in and help!

The following user(s) said Thank You: tommylight, OpenDev

Please Log in or Create an account to join the conversation.

OpenDev
Topic Author
Offline
New Member

07 Apr 2021 06:35 #205232 by OpenDev

Replied by OpenDev on topic QtPyVCP - Probe Basic Vertical

Oh i understand. At the moment i don't have the knowledge. But thank you for the nice interface!

Please Log in or Create an account to join the conversation.

spumco
Offline
Platinum Member

30 Oct 2021 01:31 #224686 by spumco

Replied by spumco on topic QtPyVCP - Probe Basic Vertical

Am I right in thinking I saw some updates in the PB Vertical branch on github a couple days ago?

Is it ready - or close - for prime time?

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: KCJ, Lcvette

Time to create page: 0.170 seconds