A CAMERA TAB

More
01 May 2021 15:16 #207554 by OpenDev
A CAMERA TAB was created by OpenDev
I tried to pack the Camview plugin like:

EMBED_TAB_NAME = CAM
EMBED_TAB_COMMAND = halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed -x {XID} cam_align

or

[APPLICATIONS]
APP = halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed -x 2 cam_align

in a CAM TAB similar to the Setupsheet TAB:

forum.linuxcnc.org/qtpyvcp/38792-display-setup-sheet

but unfortunately without success. Has anyone already done something similarly successful?

Please Log in or Create an account to join the conversation.

More
03 May 2021 22:11 #207750 by andypugh
Replied by andypugh on topic A CAMERA TAB
Which user interface are you trying to embed in?

Please Log in or Create an account to join the conversation.

More
04 May 2021 05:20 - 04 May 2021 10:05 #207789 by OpenDev
Replied by OpenDev on topic A CAMERA TAB
I trying to embed the cam align widget in a TAB of the Probe Basic Interface. Basicly to let it modular without having to modify any of the probebasic
Last edit: 04 May 2021 10:05 by OpenDev.

Please Log in or Create an account to join the conversation.

More
04 May 2021 07:32 #207796 by andypugh
Replied by andypugh on topic A CAMERA TAB
ProbeBasic is a QtPyVCP screen. I don't know how compatible it is with QtVCP embedded tabs.

I have moved this topic to see if it attracts any answers there.

Please Log in or Create an account to join the conversation.

Moderators: KCJLcvette
Time to create page: 0.124 seconds
Powered by Kunena Forum