Forum Menu

Probe Basic Help

More
2 years 3 months ago #304619 by Lcvette
Replied by Lcvette on topic Probe Basic Help
How did you install? What os are you using?

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #304623 by Catch22
Replied by Catch22 on topic Probe Basic Help
I installed Debian 12 and then I used your git hub instructions to load Probe Basic. 

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #304624 by Lcvette
Replied by Lcvette on topic Probe Basic Help
Should use this for installation

kcjengr.github.io/probe_basic/development_quick_start_apt.html

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #304625 by Catch22
Replied by Catch22 on topic Probe Basic Help
Ok, so do I need to uninstall the Probe Basic that I already tried to install...

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #304626 by Lcvette
Replied by Lcvette on topic Probe Basic Help
Probably, I'm not sure how you installed it
The following user(s) said Thank You: Catch22

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #304925 by Catch22
Replied by Catch22 on topic Probe Basic Help
I am so frustrated with this,I have installed and reinstalled about 10 times now and it doesnt even show up in the Linuxcnc menu.
i have tried following the youtube videos but they are 2 years old and the installation has changed since then.
Could someone possibly put it in an iso with linuxcnc that would work? I will pay for it, i have spent about 6 hours with no success.

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette
Time to create page: 0.283 seconds
Powered by Kunena Forum