1. User Interfaces
  3. QtPyVCP
  5. Russian machine tool company that uses LinuxCNC with Probe Basic

Russian machine tool company that uses LinuxCNC with Probe Basic

More
24 Oct 2024 10:42 - 24 Oct 2024 10:44 #313049 by MennilTossFlykune
Russian machine tool company that uses LinuxCNC with Probe Basic was created by MennilTossFlykune
beavertech.ru/stanki/beavermill-mini

File Attachment:


You get a good look at 1:25
Last edit: 24 Oct 2024 10:44 by MennilTossFlykune.
The following user(s) said Thank You: meister

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 11:01 #313051 by Unlogic
Replied by Unlogic on topic Russian machine tool company that uses LinuxCNC with Probe Basic
Interesting, I wonder if they contribute anything back to the community.

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 11:48 #313058 by Aciera
Replied by Aciera on topic Russian machine tool company that uses LinuxCNC with Probe Basic
Mind you there is a fair number of companies and individuals (even some that frequently ask for help on this forum) that make a living using LinuxCNC without giving anything back to the community. Just recently I came across a company in the US that sells Linuxcnc 2.6 (!) installed on a mediocre PC for 1200$.

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 16:02 #313103 by hairy
Replied by hairy on topic Russian machine tool company that uses LinuxCNC with Probe Basic
Tormach's PathPilot CNC controller software is built on top of LinuxCNC.

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 16:47 #313108 by Aciera
Replied by Aciera on topic Russian machine tool company that uses LinuxCNC with Probe Basic

Tormach's PathPilot CNC controller software is built on top of LinuxCNC.


Yes and Tormach did actually contribute to the Linuxcnc source code some years ago.

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 16:57 #313110 by Lcvette
Replied by Lcvette on topic Russian machine tool company that uses LinuxCNC with Probe Basic
craziness..lol

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 17:26 #313116 by tommylight
Replied by tommylight on topic Russian machine tool company that uses LinuxCNC with Probe Basic

Tormach's PathPilot CNC controller software is built on top of LinuxCNC.

Tormach also used Mesa boards for everything, they still do but i think they started making copies of them in some china factory, has to be confirmed though.
-
A big china company that manufactures automation stuff like robotic paletizers use modified LinuxCNC with a simple GUI for a small touchscreen. I dived into the inner workings and sure there where the hal and the ini and examples, all from probably 5-7 years ago. Had very limited time so could not get more info.
The following user(s) said Thank You: hairy

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 22:46 #313164 by spumco
Replied by spumco on topic Russian machine tool company that uses LinuxCNC with Probe Basic
And there's this one:

www.apsx.com/apsx-nano-cnc-swiss-lathe

Nowhere do they explicitly mention LCNC.  It runs on "ASPX CNC software."

And yet...

All the g-codes, M-codes, etc. are identical.  Post processor is minor edit of the LCNC post.

Not sus at all.

Please Log in or Create an account to join the conversation.

More
24 Oct 2024 23:05 #313167 by tommylight
Replied by tommylight on topic Russian machine tool company that uses LinuxCNC with Probe Basic
From their PDF:
To set the speed of the spindle 0 to 1000 RPM, use M3 S1000 $0 (CW 1000RPM
for the main spindle) and to turn it off use M5 $0.
To set the speed of the spindle 1 to 10000 RPM, use M3 S10000 $1 (CW only) and
to turn it off use M5 $1.

And lower on that document, at the "plot tab" is Gremlin (the LinuxCNC visualization screen, not the small monsters from the movie :) )
Last page, board with parallel port, oh yes! :)
Still the price is not astronomical.
The following user(s) said Thank You: spumco

Please Log in or Create an account to join the conversation.

More
25 Oct 2024 01:26 #313174 by spumco
Replied by spumco on topic Russian machine tool company that uses LinuxCNC with Probe Basic
Oh, and there's this...

 
Attachments:
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette
  1. User Interfaces
  3. QtPyVCP
  5. Russian machine tool company that uses LinuxCNC with Probe Basic
Time to create page: 0.153 seconds
Powered by Kunena Forum