Forum Menu

Probe_Basic Bugs?

More
1 year 10 months ago #316720 by tommylight
Replied by tommylight on topic Probe_Basic Bugs?
Do you have
home_sequence = -2
for both Y joints set in the ini file?
Or -1 or -3....
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago #316731 by CNC_ANDI
Replied by CNC_ANDI on topic Probe_Basic Bugs?
yes.

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago #316771 by Lcvette
Replied by Lcvette on topic Probe_Basic Bugs?
Perhaps that action button could be replaced with a mdi button and add in the mdi code for homing both y's?

I'm not familiar enough with dual drive axis too know how the homing would need to be called for that scenario though.

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago - 1 year 10 months ago #316873 by CNC_ANDI
Replied by CNC_ANDI on topic Probe_Basic Bugs?
I currently have Joint 0 on the X axis Joint 1 and Joint 2 in the Y axis joint 3 on the Z Axis Joint 4 on the B axis in the ini

Joint 1 as Homing 1 and Joint 2 as Homing -1
Last edit: 1 year 10 months ago by CNC_ANDI.

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago #316890 by Lcvette
Replied by Lcvette on topic Probe_Basic Bugs?
have you tried making Joint 1 and joint 2 both -1?


 

Please Log in or Create an account to join the conversation.

More
1 year 10 months ago #316913 by CNC_ANDI
Replied by CNC_ANDI on topic Probe_Basic Bugs?
yes sorry wrong information from me
joint 1 and joint 2 is -1

Please Log in or Create an account to join the conversation.

Moderators: KCJ, Lcvette
Time to create page: 0.446 seconds
Powered by Kunena Forum