Changing colors in Probe Basic
- miniwini
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 2
06 Nov 2025 22:16 #338005
by miniwini
Changing colors in Probe Basic was created by miniwini
Hi all!
well i would like to change the toolpath colors in probe basic... is there any "easy" way to do that?
i´m on the Probe Basic stable channel... on LinuxCNC 2.97
and a second question... i read about "multitool color" what does it mean?
thanks for helping...
cheers
miniwini
well i would like to change the toolpath colors in probe basic... is there any "easy" way to do that?
i´m on the Probe Basic stable channel... on LinuxCNC 2.97
and a second question... i read about "multitool color" what does it mean?
thanks for helping...
cheers
miniwini
Please Log in or Create an account to join the conversation.
- Lcvette
-
- Offline
- Moderator
-
Less
More
- Posts: 1495
- Thank you received: 712
07 Nov 2025 04:01 #338011
by Lcvette
Replied by Lcvette on topic Changing colors in Probe Basic
Not really, it's codes in Python in the vtk, and any updates will over write your edits.
Please Log in or Create an account to join the conversation.
Moderators: KCJ, Lcvette
Time to create page: 0.050 seconds