QtDragon on Debian Buster, some issues

Hello,
Sorry, I've not got to testing for the probe and MPG. Meanwhile, got a potentiometer for Feed override working(Axis). But, here is my problem.

In, Qtdragon, when I change to MODE 1 for the MESA 7i76e in my .INI . The four pins don't change to Analog. They stay as I/O. (INI &HAL in first post above).
where as the same INI in AXIS does switch the pins over. Any help is welcome.
Thanks.

Have you set the smart-serial software mode correctly? (loadrt hm2_hm2_eth .... sserial_port_0="200xxxxx" or similar)

You would need to change
sserial_port_0=00xxxx
to
sserial_port_0=20xxxx
or
sserial_port_0=10xxxx

to get access to the 7I76E analog inputs

Hi Aciera,
Thanks for the response.
Yes, I have the same INI with sserial set to 1 , that works in AXIS and in HAL meter I see the ANALOG0 inputs. But, in QTdragon, it stays as a I/O.
And I have no errors.

where as the same INI in AXIS does switch the pins over

I apologize. I clearly need to read more carefully. :blush:

can you post both configs?

Hi Chris,
Here the two configs. Hope you can find something, as I've run outta ideas.