qtVCP not working for RPI 2.8 image

[QTvcp.QTVCP.LIB.SYS_NOTIFY][WARNING] Descktop Notify not availale:: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Notifications was not provided by any .service files (sys_notify.py:67)\

install notification daemon, i just tried to run it without notify running and i get the same errors
and perhaps try to get qtvcp working before the vtk stuff

Unable to open /usr/share/qtvcp/screens/qtdragon/resources.py for writing\

Make sure you have a .qrc file in your config directory. There's one on the qtdragon github. User pi cannot write to /usr without root privilege. You should not change the permissions - the resources.py file should be written to the config directory.

[QtDesigner.QTVCP.QT_TSTAT][DEBUG] Toolfile does not exist' tool.tbl (qt_tstat.py:113)\

There's no tool table. You can copy one from one of the other example configs.

There's fewer errors in the second log because it wrote missing parameters to the pref file on the first run. Not to say these are the root causes, but fixing these will get you a step closer.

@cakeslob I searched the web but I didn't find how to install desktop-notify..
Have a suggestion?

@persei8 I did what you suggested.
- Copied tool.tbl and the qtdragon.qrc found in QtDragon-master
- Modified qtdragon.qrc (pi instead of ijm)
- also created /home/pi/linuxcnc/configs/qtdragon/images and copied the images in it

now if i run it I have a different result (I also see for a second the UI in the xyz example, not the other ones) but still crashes.
I attach the log

log didn't attach

sudo apt-get install notification-daemon

probably have to configure it or something, I have to run mine every time before qtvcp, heres my errors with and without notify, a lot can get through but not notify, even if its turned off in prefs . also, here is my no graphics version of qtdragon i use for testing

I'll look into why notify is required - it shouldn't be.

Chris