I think github.com/LinuxCNC/linuxcnc/pull/4453 alleviates the issue, testing on machine needed for anyone available to do so

had a stab at #3455 as well github.com/LinuxCNC/linuxcnc/pull/4453
also check
github.com/LinuxCNC/linuxcnc/pull/4441

Dear meister:

item.taobao.com/item.htm?abbucket=19&id=...%7D&xxc=taobaoSearch

This is the link.

1.I am not sure if it is appropriate to post my product link here; if not, I will remove it.
2.I’m not a merchant; I’m just a DIY enthusiast. In my spare time, I make small items and sell them in my little Taobao shop. When a customer from China makes a purchase, I get a notification via the Qianniu app; the order includes a Chinese shipping address, and after paying about $1 for shipping, the buyer receives the item in a few days. However, I have absolutely no idea how to handle orders with foreign addresses. I’ve had English-speaking customers place orders before, but the delivery addresses were still within China, so I assume they were likely foreigners living there.
3.I would be very happy if someone could check out my little shop.


Tim
 

Quick development update

Over the past few weeks I've mainly been working on two areas that weren't reliable yet: internal machining and automatic thread reliefs.

Fixed internal roughing: The internal roughing cycle was in some cases producing a single, way-too-coarse cut instead of properly staged passes ("not really a cutting strategy"). Found the root cause and fixed it – now it produces even, multi-pass stepping just like external turning does.
Reworked DIN 76 thread reliefs: Previously only a simple rectangular pocket was generated. Now the actual DIN 76 profile is output (30° lead-in, tangential arcs, relief bottom, shoulder radius), using real values from the DIN 76-1 table instead of estimated widths. The relief is now correctly anchored to the end of the thread (not the end of the contour), and it now also works in the middle of a longer contour, not just at the very start or end.
Safer internal approach moves: When feeding into a bore, the tool now always moves axially to the clear retract plane first and only then feeds in radially – no more diagonal rapid moves straight through the bore.
Also fixed a few real LinuxCNC crashes along the way (e.g. tool nose compensation at the inside relief corner, a "Not monotonic" error with G71/G72 when a relief is spliced into the contour).
Important: All of this is currently only on the dev branch, not yet in the stable release. Not everything has been verified with a real dry run on the machine yet, but preview and generated code now look correct for the cases tested so far. As always: feedback, test cases, and criticism are welcome.

Shaft Gauge - a free browser tool to measure STL files (mm)

I built a small, single-file web tool for quickly reading dimensions off an STL mesh, handy when you just need a measurement without opening full CAD (with claude AI).

Drag in an STL and you get:
- Diameter and length (auto shaft-axis detection) plus full bounding-box dimensions
- Point-to-point distance with vertex snapping
- 3-point circle fit to read a bore/round feature diameter (works on tilted planes)
- 2D cross-sections on the XY / XZ / YZ planes with a movable slider
- Volume, triangle count, light/dark theme

No install, no sign-up, and your file never leaves your device - everything runs locally in the browser (binary and ASCII STL). Open source (MIT).

Live demo: emresensoy.github.io/MeasureFromSTL/
Source: github.com/emresensoy/MeasureFromSTL

Feedback and feature ideas welcome.

Since you said the link was wrong, feel free to post the correct one and do a bit of promotion for your Carrot Board

Dear meister:

What informations do you need?

I had posted schmatic, pcb plot vlews,and user manual, in the user manual have all information about this board


Tim



 

A little progress.
After installing the transformer, I'm wondering again whether its power rating is sufficient for three 1.5 kW servo motors.
The transformer is rated at 4.7 kVA, 415 V to 220 V, 3-phase.

What do you guys think? Is 4.7 kVA enough for three 1.5 kW servo motors?

 

Why not post the correct links here again? You could also add a bit of information about your Carrot board.

@all: With some projects, people complain when someone builds and sells hardware for them. You don’t need to worry about that here – it’s an open-source project, and I have no financial interest in it; it’s just a hobby. On the contrary, I’m actually really pleased when someone else offers others the chance to get ready-made hardware. I’d be delighted if there were even more of these available – and ideally in a way that means you can order them here in Germany too (AliExpress?!?)

OK, there’s just one thing I do expect: if you end up becoming millionaires because of this, you can treat me to a meal ;P

Best wishes, Olli

Hi Aciera, nice to meet you!

My Problem is: My USB-MPG sends weird keys, Alt /M , Alt / - , Alt / % , Alt / # , Alt/= , F10 , F11.
Alt / % sends Alt + Shift + 5 , which makes it "interesting" to grab...
F10 and F11 opens the menu and toggles between fullscreen and windowmode.

So, at first i have to somehow keep these keys from interacting with the UI of Linuxcnc, ONLY interacting with hal_input.
I tried  i tried none of these stops interacting with my ui..

What i did so far, i grabbed the USB-name, and vendor and productkey of my USB-Davice.
I wrote a UDEV rule which worked after a bit of confusion.
i loaded the device in the halfile ( of the sim so far ) and i could see most of my keys turn yellow in the halshow.

So my first attempt ( asking the AI, which was not my best option when i think about it now ) was to remap the keys with keyd.
I wrote a default.conf to remap the keys. What happened?
The keys which send F10 and F11 do no longer affect ma ui! No toggling window to fullscreen.
But i struggled at importing the "virtual keyd keyboard" into LinuxCNC. I would like to use " , but these don't work for me, i do not know why ( see above ) 

One of my Problems:
I cannot load the keyboard via "name", does NOT work.. works! As far as i know, i should use " whenever i have blanks in a filename / path / device.
I do not really understand why..

Thanks for any help in advance!
Honestly, i tried with AI-support, but this only calmed my mood because our jobs are safe for a looong time, so crappy answers..
Greets, Tom

Hi folks,

i tried remapping the keys on my usb-MPG with keyd, but i struggle importing them into the hal.

Is there a prefered way of remapping keys for linuxcnc and do you have a link to a turorial or a manual?

Thanks in advance,

Greets Tom