Congratulations and well deserved.

"I get all kinds of errors and will not load."

As you have not provided any info regarding the errors it is hard to diagnose the errors you are having.

Congrats mate.

Hello, I have a machine with handwheels that can be moved with the power off. For reasons that I won't get into, I want to be able to set everything up manually, move the tool to the part origin and then directly tell linux CNC that my tool is at X0 Y0 Z0.25" from home and then touch off the part.

I don't see a shortcut in AXIS to do this? Is there g code that I can put in the MDI to tell it where the current machine position is?

Thanks.

I'm sure you've got a reason for constantly swapping around your tools in a few holders, but my experience is that the less I move tools around in holders, the happier I am. It's a huge quality of life improvement IMO- reduced tedium, reduced chance of human error, reduced mental load of trying to fit all the operations into a couple tools (and/or making compromised toolpaths because you really don't want to have to change to that n'th tool)

My procedure for setting up tools uses the spindle nose as a reference and a 1-2-3 block:

1. With no tool offset applied (G49), jog spindle down to close to some reference- mill table, vise, whatever works.

2. Slowly jog spindle up until 1-2-3 block barely fits under it. Zero the work coordinate system

3. Insert a tool into the spindle, but do NOT run M6Tn- just physically insert the tool. Jog the spindle up until the 1-2-3 block (in the same orientation) just slides under the tool. Enter the Z value shown in LinuxCNC into the tool table.

4. Repeat #3 for any other tools

5. To use tools, call a toolchange with M6 Tn, for tool n. Then call G43. You can then use any tool (once you've loaded the offset) to set up the WCS for the current job and the others will follow.

The nice thing about this is you don't need a fixed reference point- probably most repeatable if you always use exactly the same place every time, but so long as you can reference the fixed spindle nose and the tool without shifting other stuff in between, nominally it all comes out correct.

The above also applies to touch probes- they get set up like any other tool (also a huge QoL improvement- even the cheap one I have has been great)

I'm afraid of Google Translate. The translation doesn't seem legible; it looks distorted.

This function comes in my PC's BIOS, "S3 video repost," and it was also part of a latency problem that I disabled.

Thanks Nick. I might start with a similar 4th Axis. I'm also looking for a used microarc.

andypugh wrote:

cnbbom wrote:

And can you please confirm that the machine actually crashes with a PWM in the base thread? 




 

As I explained here, I'm doing things manually and trying to learn, I don't know how to verify this, but remember that I did this test with preempt RT. That is, a clean installation of the linuxcnc CD with the modifications suggested by rodw. I tested with isolcpus 1, 2, 3 cores, then reduced it to 2.3 and even then the latency improved.

With the CD installation, PWM works, and the problem with trying to install the RTAI kernel was due to the high latency, which reached 120000.

File -> Edit Tool Table
You can manually enter the offsets of any tool.
(don't forget to reload it after editing)

The part that confused me is that the tool offset is not the offset of the *tool*, but how much you have to move the *spindle* to make the tool tip be in the right place.

That's why when you measure a longer tool, you get a bigger number, so people think it's "tool length" but internally it's not. My laser has X and Y offsets too, so when I switch to the laser the whole machine moves to put the laser in the right spot.

Yes, very familiar withTool length setting and setters, including those with RFID chips in a production facility, but my machine for sure has no way to straight forwardly attach a gauge to a non moveable part,
In fact that's an interesting question, if say I had an iso30 tool length setter, that measured the tool tip to taper gauge point, where exactly would you store that number in Linuxcnc?

Anyway, All the bits I'll ever make are more or less one offs, and every tool set will be unique, so for now I'll use the method I have worked out until it bites back.

did you turn on power to the Mesa card before starting linuxcnc?

1. Suggested pullup is 2.2K 1/2w for 24V. The only disadvantage of the pullup is the wiring nuisance.
10K will not work.

2. Enable on simple step/dir drives is not of much value safety wise as it's very unlikely to have a runaways
without the control generating step/dir pulses (and step generation will stop on a LinuxCNC or communication fault)

3. Its important that the default state of 7I76EU outputs be the safe state as all outputs will return to the power up state on
communication loss. This initial state is all outputs open circuited (this is true even if the outputs were set to push-pull mode)

Well, I can't recommend the servo reference run!
The problem is that it is not monitored. If an axis does not move, Linuxcnc does not notice. It happened to me again today. During homing, a Y-axis does not start moving, even though I waited until all axes were OP.
I will switch back to Linuxcnc homing.
It's a pity that the servos do not output the Z signal.