Cincinnati 10HC2500 ATC with custom HAL component

More
22 Jun 2016 07:57 #76398 by terkaa
Hi,

Here is a short and hasty video of ATC on Cincinnati 10HC2500 I am working on. This is made with custom HAL components ARMATC + PIN_ORIENT also Andys CAROUSEL component is used here for tool magazine. I still have few things to work out but it is mostly working now.



Tero

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 08:01 #76400 by andypugh
Good to see it move.

Please Log in or Create an account to join the conversation.

More
22 Jun 2016 13:22 #76423 by terkaa
Thank you for pointing me to right direction many times.


Tero

Please Log in or Create an account to join the conversation.

More
23 Jun 2016 11:17 #76485 by terkaa
Ok, Finished.




Tero

Please Log in or Create an account to join the conversation.

More
29 Aug 2016 09:18 #79637 by terkaa
Now added Y-axis movement and first runs in Auto mode. Still have to order & install Fagor scales for X and Z axes.



Tero

Please Log in or Create an account to join the conversation.

More
29 Aug 2016 12:16 #79645 by tommylight

Please Log in or Create an account to join the conversation.

More
21 Sep 2016 05:31 #80709 by terkaa
Video of first tryouts G84 tapping with floating holder:




File Attachment:


Tero

Please Log in or Create an account to join the conversation.

More
14 Oct 2016 12:47 #81641 by terkaa
Ok,

Now we have missing linear scales from Fagor. Still lot of servo tuning to do and bunch of other small stuff....




Tero

Please Log in or Create an account to join the conversation.

More
20 Oct 2016 09:06 - 20 Oct 2016 09:07 #81884 by terkaa
Ok, first actual part is now machined. It is a operator cabin base plate for mining trucks. It did use G84 floating tapping cycle and it does work very well.

File Attachment:


File Attachment:


Tero
Last edit: 20 Oct 2016 09:07 by terkaa.

Please Log in or Create an account to join the conversation.

More
20 Oct 2016 09:22 #81885 by terkaa
One from electic cabinet also.

File Attachment:


Tero

Please Log in or Create an account to join the conversation.

Time to create page: 0.096 seconds
Powered by Kunena Forum