Blender Addon for creating 5 axis GCode
- jairobbo
- Offline
- New Member
-
Less
More
- Posts: 18
- Thank you received: 4
27 Feb 2025 11:54 #322785
by jairobbo
Blender Addon for creating 5 axis GCode was created by jairobbo
Hey Guys,
If you have a moment. This video as well as the code is super rough, but I wanted to raise a bit of attention for those that are interested:
I have a modified Ender3 3d printer with two rotational axes. It is controlled by a raspberry pi and an cotopus board 1.1 with remora linuxcnc.
github.com/bbo-git/5AxisSlicerBlenderAddon # indexed slicer with cura engine backend
github.com/bbo-git/5AxisKinSlicerBlenderAddon # spiral toolpath creator and Gcode generation
with kind regards,
Jairo
If you have a moment. This video as well as the code is super rough, but I wanted to raise a bit of attention for those that are interested:
I have a modified Ender3 3d printer with two rotational axes. It is controlled by a raspberry pi and an cotopus board 1.1 with remora linuxcnc.
github.com/bbo-git/5AxisSlicerBlenderAddon # indexed slicer with cura engine backend
github.com/bbo-git/5AxisKinSlicerBlenderAddon # spiral toolpath creator and Gcode generation
with kind regards,
Jairo
The following user(s) said Thank You: tommylight, cakeslob, Aciera
Please Log in or Create an account to join the conversation.
- Aciera
-
- Offline
- Administrator
-
Less
More
- Posts: 4283
- Thank you received: 1893
18 Mar 2025 08:33 #324178
by Aciera
Replied by Aciera on topic Blender Addon for creating 5 axis GCode
Thanks for sharing!
The following user(s) said Thank You: jairobbo
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds