I CNC'ed my table to move a camera.
- tommylight
-
Topic Author
- Offline
- Moderator
-
Less
More
- Posts: 21739
- Thank you received: 7429
09 Jul 2026 02:04 #347618
by tommylight
I CNC'ed my table to move a camera. was created by tommylight
My latest brain fart
The following user(s) said Thank You: rodw, spumco
Please Log in or Create an account to join the conversation.
- tuxcnc
- Offline
- Elite Member
-
Less
More
- Posts: 177
- Thank you received: 24
09 Jul 2026 03:23 #347620
by tuxcnc
Replied by tuxcnc on topic I CNC'ed my table to move a camera.
Overkill...
For purposes like this, GRBL is more than enought...
For purposes like this, GRBL is more than enought...
Please Log in or Create an account to join the conversation.
- rodw
-
- Online
- Platinum Member
-
Less
More
- Posts: 12033
- Thank you received: 4106
10 Jul 2026 02:23 #347649
by rodw
Replied by rodw on topic I CNC'ed my table to move a camera.
Very cool Tommy. Now if you have a compatible video system or switcher, you can use an NDI App on your phone and you can go wireless on your network. I've been using NDI with a Rodecaster Video S for overhead shots wirelessly from my Pixel phone! Rode have a free app for Iphone.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.082 seconds