Running the LinuxCNC GCode interpreter in the browser
- koppi
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 3
18 Nov 2026 11:31 #350803
by koppi
Running the LinuxCNC GCode interpreter in the browser was created by koppi
I stripped away the Python and HAL code from the LinuxCNC gcode intrepreter so that it is now possible to run the RS274NGC in the web browser:
qgcoder.github.io/qgcoder/
Source code avaiable at: github.com/QGCoder/qgcoder
Downloads for Debian/Ubuntu, Windows and macOS are available in the release section on GitHub.
Best regards,
koppi
qgcoder.github.io/qgcoder/
Source code avaiable at: github.com/QGCoder/qgcoder
Downloads for Debian/Ubuntu, Windows and macOS are available in the release section on GitHub.
Best regards,
koppi
The following user(s) said Thank You: Todd Zuercher, tommylight, MX_Master
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 22049
- Thank you received: 7509
18 Nov 2026 12:06 #350804
by tommylight
Replied by tommylight on topic Running the LinuxCNC GCode interpreter in the browser
OK, where does that leave HAL now?I stripped away the Python and HAL code from the LinuxCNC gcode intrepreter so that it is now possible to run the RS274NGC in the web browser:
Please Log in or Create an account to join the conversation.
- Todd Zuercher
-
- Offline
- Platinum Member
-
Less
More
- Posts: 4795
- Thank you received: 1483
19 Nov 2026 04:56 #350816
by Todd Zuercher
Replied by Todd Zuercher on topic Running the LinuxCNC GCode interpreter in the browser
So you used the Linuxcnc G-code interpreter to make a basic live view G-code editor. Nice a program like this can be very handy.
Next add some more handy G-code editing tricks and I won't need to pay for NCPlot any more.
Next add some more handy G-code editing tricks and I won't need to pay for NCPlot any more.
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 19914
- Thank you received: 4662
19 Nov 2026 06:46 #350824
by andypugh
Replied by andypugh on topic Running the LinuxCNC GCode interpreter in the browser
Was this a sensible way to do this?
You can already trial-run a G-code program from the command line with the "rs274" command if LinuxCNC is installed.
linuxcnc.org/docs/stable/html/man/man1/rs274.1.html
(Might have saved you some work)
But welcome to the forum, Koppi. I think this was yours too, from before even I was involved in the project?
wiki.linuxcnc.org/cgi-bin/wiki.pl?Koppi%27s_Toy
You can already trial-run a G-code program from the command line with the "rs274" command if LinuxCNC is installed.
linuxcnc.org/docs/stable/html/man/man1/rs274.1.html
(Might have saved you some work)
But welcome to the forum, Koppi. I think this was yours too, from before even I was involved in the project?
wiki.linuxcnc.org/cgi-bin/wiki.pl?Koppi%27s_Toy
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
Time to create page: 0.117 seconds