Hurco BMC 20 Ultimax 3 Retrofit

07 Aug 2016 14:05 - 07 Aug 2016 23:19 #78438 by Jake
I got it all to home now!

I wanted to try the AXIS SPLASH g code. But when I touch off it says can not issue MDI code with axis not homed. It is showing all three axis homed, and I have jogged back to about the center and touched off there.

I selected G54 when I touched off.

Any thoughts? This is the first time I am actually getting to move around now!
Last Edit: 07 Aug 2016 23:19 by Jake.
08 Aug 2016 03:55 #78478 by Jake
I did not have all the 4th axis commented out or removed.

ITS ALIVE!!!!!!!!!! It ran the Linux CNC splash code! Looks like there is some more tuning needed as circles are not quite round. Then onto the tool changer!
Moderators: piasdom
Time to create page: 0.104 seconds
Powered by Kunena Forum