SPINDLE AUTOMATIC
04 Apr 2015 03:42 #57496
by gois
SPINDLE AUTOMATIC was created by gois
Good Evening!
I am a CNC Router comtando with 3 axles with automatic tool change. Could someone pass me any examples of how to configure emc2 to use the automatic exchange.
I am a CNC Router comtando with 3 axles with automatic tool change. Could someone pass me any examples of how to configure emc2 to use the automatic exchange.
Please Log in or Create an account to join the conversation.
04 Apr 2015 13:14 #57509
by ArcEye
Replied by ArcEye on topic SPINDLE AUTOMATIC
Hi
Entirely depends upon how the toolchange is done.
There are 4 tool change components here which could be a basis for one for your machine, if the operating sequence is similar in any way.
The other alternatives are pure gcode sub routines or M6 remapping
regards
Entirely depends upon how the toolchange is done.
There are 4 tool change components here which could be a basis for one for your machine, if the operating sequence is similar in any way.
The other alternatives are pure gcode sub routines or M6 remapping
regards
Please Log in or Create an account to join the conversation.
06 Apr 2015 06:46 #57565
by gois
Replied by gois on topic SPINDLE AUTOMATIC
Any example of how should I do?
At first I use a spindle with cone iso30.
The tools will be online, I would like to put a sub routine to return the tool and seek new rerramenta.
I could spend some example of how I can do to not break both the head to create this subroutine?
At first I use a spindle with cone iso30.
The tools will be online, I would like to put a sub routine to return the tool and seek new rerramenta.
I could spend some example of how I can do to not break both the head to create this subroutine?
Please Log in or Create an account to join the conversation.
Time to create page: 0.119 seconds