Forum Menu

M6T Remap

More
8 years 11 months ago #101838 by bevins
Replied by bevins on topic M6T Remap
tool-prep-number doesnt carry the Tx ?

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101841 by pmcstoneinc
Replied by pmcstoneinc on topic M6T Remap
It carrys the T, but M6 (remap) doesnt see the updated T if that makes sense......

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101842 by bevins
Replied by bevins on topic M6T Remap
Then that would be up to your remap code to use it.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago - 8 years 11 months ago #101844 by pmcstoneinc
Replied by pmcstoneinc on topic M6T Remap
o<change> sub
G53G0Z0
G4P0.1
G0 X40 Y-[#<_hal[iocontrol.0.tool-prep-pocket]>*150]
o<change> endsub [1]
m2

using stdglue.py remap for M6, TX is just looped together
Last edit: 8 years 11 months ago by pmcstoneinc.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago - 8 years 11 months ago #101845 by pmcstoneinc
Replied by pmcstoneinc on topic M6T Remap
only way this works properly is if I call TX first, cycle, and then M6 The issue occurs with same line commands...
Last edit: 8 years 11 months ago by pmcstoneinc.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #101846 by bevins
Replied by bevins on topic M6T Remap
I havent used o word subs. I use python remaps.

But I do not have issues with tool-prepare.

Please Log in or Create an account to join the conversation.

Time to create page: 0.053 seconds
Powered by Kunena Forum