Compensation of axis deviation
20 Feb 2018 15:36 #106239
by agsarg
Compensation of axis deviation was created by agsarg
Hi everyone, i am trying to correct the typical y axis misalignment respect to x axis. I am currently using a linear equation, it looks like it´s working but when I jog the y axis it makes a joint movement and displays the deviation on the sceen. How can i do the jogging of y axis with the compensation so the axis display keeps the x at it´s position? Thanks!
Please Log in or Create an account to join the conversation.
28 Feb 2018 17:36 #106730
by andypugh
Replied by andypugh on topic Compensation of axis deviation
Have a look at "millkins" on the Wiki
Please Log in or Create an account to join the conversation.
28 Feb 2018 21:51 #106768
by rodw
Replied by rodw on topic Compensation of axis deviation
There was a recent thread that achieved this with a custom component and the final source was included
forum.linuxcnc.org/10-advanced-configura...-errors?limitstart=0
forum.linuxcnc.org/10-advanced-configura...-errors?limitstart=0
The following user(s) said Thank You: agsarg
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds