Linking spin box to parameter using conv-floaty32

andypugh
Offline
Moderator

04 May 2019 13:08 #132733 by andypugh

Replied by andypugh on topic Linking spin box to parameter using conv-floatu32

steplen is a parameter rather than a pin. So it can’t be part of a net.

Have a look at pwmgen instead.
linuxcnc.org/docs/2.7/html/man/man9/pwmgen.9.html

Please Log in or Create an account to join the conversation.

microsprintbuilder
Offline
Elite Member

04 May 2019 17:12 #132752 by microsprintbuilder

Replied by microsprintbuilder on topic Linking spin box to parameter using conv-floaty32

I will have to look at the comp to understand how I can use this in my application. I'd like to be able to just input a on time and a frequency or off time. Right now it's clear as mud.
Thanks:)

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

04 May 2019 17:18 #132753 by andypugh

Replied by andypugh on topic Linking spin box to parameter using conv-floaty32

You won't need the conversion function with pwmgen either.

Please Log in or Create an account to join the conversation.

Time to create page: 0.062 seconds