Ngcgui demo not found on my config picker
- Dinuka_Shehan
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 333
- Thank you received: 26
21 Mar 2020 17:39 #161007
by Dinuka_Shehan
Ngcgui demo not found on my config picker was created by Dinuka_Shehan
Recently I tried a lot with linux cnc but no success for me.
I am using mini lathe which convert to cnc my own.
I watched this video and reliase that my linux cnc wheezy 2.7 downloaded file have lost some data probably.
There are lot of selectable configs on this video.my version have few of those.
Can I download them.
Ngcgui
I am using mini lathe which convert to cnc my own.
I watched this video and reliase that my linux cnc wheezy 2.7 downloaded file have lost some data probably.
There are lot of selectable configs on this video.my version have few of those.
Can I download them.
Ngcgui
Please Log in or Create an account to join the conversation.
- phillc54
-
- Offline
- Platinum Member
-
Less
More
- Posts: 5723
- Thank you received: 2095
21 Mar 2020 23:22 #161038
by phillc54
Replied by phillc54 on topic Ngcgui demo not found on my config picker
They appear in the Config Picker at Sample Configurations - sim - axis - ngcgui
github.com/LinuxCNC/linuxcnc/tree/2.7-bu...figs/sim/axis/ngcgui
github.com/LinuxCNC/linuxcnc/tree/2.7-bu...figs/sim/axis/ngcgui
The following user(s) said Thank You: Dinuka_Shehan
Please Log in or Create an account to join the conversation.
Time to create page: 0.070 seconds