Forum Menu

hostmot2 oneshot bitfile help

More
3 years 10 months ago #259102 by PCW
Replied by PCW on topic hostmot2 oneshot bitfile help
what does mesaflash --readhmid show?

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259106 by roland
Replied by roland on topic hostmot2 oneshot bitfile help
mesaflash --readhmid output see at the beginning of the previous post
Output seem okay for me


or this attached file:

File Attachment:

File Name: readhmid.txt
File Size:5.52 KB

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259112 by PCW
Replied by PCW on topic hostmot2 oneshot bitfile help
Look like there's a bug in the command line parsing
Try without the num_oneshots stanza in the command line
The following user(s) said Thank You: roland

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259114 by roland
Replied by roland on topic hostmot2 oneshot bitfile help
without the num_oneshots stanza i get the pins in hal :)
Code:
loadrt    hm2_eth board_ip="10.10.10.10" config=" num_encoders=4 num_rcpwmgens=1 num_stepgens=6 sserial_port_0=2120xx"

 

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago - 3 years 10 months ago #259120 by PCW
Replied by PCW on topic hostmot2 oneshot bitfile help
Parse bug fixed in master

I also changed the firmware a bit so the sw triggers work identically
to the external triggers, should not affect you but here is the
updated oneshot source:

 

File Attachment:

File Name: oneshot.zip
File Size:2.97 KB
Last edit: 3 years 10 months ago by PCW.
The following user(s) said Thank You: roland

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #259129 by andypugh
Replied by andypugh on topic hostmot2 oneshot bitfile help

Parse bug fixed in master
 
Does it belong in 2.9 too? 

Please Log in or Create an account to join the conversation.

Time to create page: 0.380 seconds
Powered by Kunena Forum