How to configure Horizontal Boring mill
- yrsiddhapura
- Offline
- Premium Member
-
Less
More
- Posts: 131
- Thank you received: 5
20 Jan 2023 18:34 #262512
by yrsiddhapura
Replied by yrsiddhapura on topic How to configure Horizontal Boring mill
@andy i seen a thread where you give suggest to photos.app.goo.gl/cFtC9m7CeLSKASAa7 as pwm potentiometer which quite interesting but could you suggest voltage value for 1uf capacitor and watt value for 1k resistor
Please Log in or Create an account to join the conversation.
20 Jan 2023 22:25 #262526
by andypugh
Replied by andypugh on topic How to configure Horizontal Boring mill
At least 10V for the cap (I would use a 30V I think) and the power through the resistor can't be more than V^2/R = 0.1W.
Looking at a random VFD online, that has an input impedance of 30k, so the current through the 1k resistor is a max of 30uA and a power dissipation (I^2 x R) in the 1k resistor of 0.0001W.
Looking at a random VFD online, that has an input impedance of 30k, so the current through the 1k resistor is a max of 30uA and a power dissipation (I^2 x R) in the 1k resistor of 0.0001W.
The following user(s) said Thank You: yrsiddhapura
Please Log in or Create an account to join the conversation.
- yrsiddhapura
- Offline
- Premium Member
-
Less
More
- Posts: 131
- Thank you received: 5
21 Jan 2023 15:05 #262584
by yrsiddhapura
Replied by yrsiddhapura on topic How to configure Horizontal Boring mill
So 10k 1/4 resistor good to go with this circuit
Please Log in or Create an account to join the conversation.
23 Jan 2023 16:50 #262749
by andypugh
Replied by andypugh on topic How to configure Horizontal Boring mill
You want a sensible RC time constant. (Just multiply the capacitance and resistance together (remembering the prefixes) and the answer is the response time in seconds.
The following user(s) said Thank You: yrsiddhapura
Please Log in or Create an account to join the conversation.
- yrsiddhapura
- Offline
- Premium Member
-
Less
More
- Posts: 131
- Thank you received: 5
24 Jan 2023 08:39 - 24 Jan 2023 08:41 #262803
by yrsiddhapura
Replied by yrsiddhapura on topic How to configure Horizontal Boring mill
Ohw sorry It was typing mistake what i mean is 1k 1/4 watt resistor (not 10k 1/4 watt) would good to go ?
I had ordered acpl-p480 would take about 3 week (as not available in Indian retail market)
I had ordered acpl-p480 would take about 3 week (as not available in Indian retail market)
Last edit: 24 Jan 2023 08:41 by yrsiddhapura.
Please Log in or Create an account to join the conversation.
Time to create page: 0.147 seconds