Forum Menu

LinuxCNC randomly crashes reportedly due to Python bug

More
1 year 2 months ago #332793 by matasbuk
LinuxCNC randomly crashes reportedly due to Python bug was created by matasbuk
Hello, I am running the master branch of LinuxCNC with QTLathe GUI. I have a Python component that reads the feed rate from linuxcnc.stat and further use that value in my C component. The machine seems to randomly hard crash and exit LinuxCNC fully. What could be the problem ar what could I change to solve this? Thank you in advance! I am attaching the Python and C components, .ini and .hal files and the error log.

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #332796 by unknown
Replied by unknown on topic LinuxCNC randomly crashes reportedly due to Python bug
Code:
Unexpected realtime delay on task 0 with period 1000000 This Message will only display once per session. Run the Latency Test and resolve before continuing. Starting DISPLAY program: qtvcp hm2/hm2_7i95.0: Smart Serial port 0: DoIt not cleared from previous servo thread. Servo thread rat.sserial.0.fault-count pin will indicate if this is happening frequently.

The error log has identified an issue (noted above), you will need to address this.

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #332819 by matasbuk
Replied by matasbuk on topic LinuxCNC randomly crashes reportedly due to Python bug
Solving the realtime delay should solve this? Didn’t consider this as I thought Python did not ran in realtime

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #332820 by tommylight
Replied by tommylight on topic LinuxCNC randomly crashes reportedly due to Python bug
1. whatever you are doing to log all the 0's and 50's , don't, just had to scroll through over 70 pages of it, it is not fun and wastes a lot of very precious time
2. none of the two mentioned errors will not stop the LinuxCNC from running
3. Python error, as noted at the end of a very long error log, having to do with jog buttons as it seems
-
Try using Axis GUI, make the machine work properly by fixing latency issues and the "dolt not cleared" as this will disable the Mesa card completely.
Then try other GUI's.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #332865 by rodw
Replied by rodw on topic LinuxCNC randomly crashes reportedly due to Python bug
Why are you using Python when the feed rate is available in real time in motion? There are other options but try this pinmotion.feed-upm OUT FLOATCurrent feed rate in G-code program units per minute for motion.motion-type feed(2) and arc(3). Value is the G-code program F value multiplied by the current feed override value and the motion.adaptive-feed setting (if M52 active). Value is zero if motion.feed-hold or motion.feed-inhibit are asserted. If units (G20 or G21) are not specified in the G-code file then units will be the last units used. linuxcnc.org/docs/stable/html/man/man9/motion.9.html

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago - 1 year 2 months ago #333045 by MennilTossFlykune
Replied by MennilTossFlykune on topic LinuxCNC randomly crashes reportedly due to Python bug
I've also been getting this in QtDragon_hd.
Code:
Fatal Python error: none_dealloc: deallocating None: bug likely caused by a refcount error in a C extension Python runtime state: initialized Thread 0x00007f9835f3c6c0 (most recent call first): <no Python frame> Thread 0x00007f9863bff6c0 (most recent call first): <no Python frame> Current thread 0x00007f98aa3ed040 (most recent call first): File "/home/user/Documents/linuxcnc/lib/python/qtvcp/widgets/state_led.py", line 140 in change_state File "/home/user/Documents/linuxcnc/lib/python/qtvcp/widgets/state_led.py", line 135 in _flip_state File "/home/user/Documents/linuxcnc/lib/python/qtvcp/widgets/state_led.py", line 237 in _set_halpin_text File "/home/user/Documents/linuxcnc/lib/python/qtvcp/widgets/state_led.py", line 130 in <lambda> File "/home/user/Documents/linuxcnc/lib/python/common/hal_glib.py", line 930 in update File "/home/user/Documents/linuxcnc/bin/qtvcp", line 463 in __init__ File "/home/user/Documents/linuxcnc/bin/qtvcp", line 607 in <module>

It was caused by this commit:
github.com/LinuxCNC/linuxcnc/commit/656a...de1ab167c3e89f700a7e

In halmodule.cc, if all occurrences of
Code:
return Py_None;
are changed back to
Code:
Py_RETURN_NONE;
the error goes away.
Last edit: 1 year 2 months ago by MennilTossFlykune.
The following user(s) said Thank You: matasbuk

Please Log in or Create an account to join the conversation.

Time to create page: 0.072 seconds
Powered by Kunena Forum