×
Forum Header
Velocity and Acceleration settings as well as table travel nos for a RF30 mill
06 Mar 2018 04:49 #107013
by rodw
Well, it actually does km/hr too, its just your speedo is out by a factor of 1.609!
So your R1 is travelling at 100 km/hr, its doing 27.77 m/sec (in SI units)
Andy, the question everyone wants answered is can your R1 accelerate at an average of 9.26 m/sec/sec to achieve 100 km per hour in 3 seconds?
Thats approaching Tesla ludicrous mode performance so we need video evidence please!
And yes, the numbers are really quite different. I think acceleration is hard to grasp for the non engineering layperson.
Replied by rodw on topic Velocity and Acceleration settings as well as table travel nos for a RF30 mill
Actually, I am in the UK and my R1 does mph. (and tops out at 186 mph, apparently).
Well, it actually does km/hr too, its just your speedo is out by a factor of 1.609!
So your R1 is travelling at 100 km/hr, its doing 27.77 m/sec (in SI units)
Andy, the question everyone wants answered is can your R1 accelerate at an average of 9.26 m/sec/sec to achieve 100 km per hour in 3 seconds?
Thats approaching Tesla ludicrous mode performance so we need video evidence please!
And yes, the numbers are really quite different. I think acceleration is hard to grasp for the non engineering layperson.
Please Log in or Create an account to join the conversation.
Time to create page: 0.059 seconds