×
Forum Header
Zenbot 24x24 config file
- tonythemediaguy
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
30 Sep 2018 00:25 #118211
by tonythemediaguy
Zenbot 24x24 config file was created by tonythemediaguy
Hello,
I just got a used Zenbot 24x24 and I need to find the Mach3 config file, or any config file. I picked up an older Dell, installed LinuxCNC, and got all three axis working. I just need that config file and I think I'll be in business. I'm coming from the laser-world so a lot of this is new to me.
Thanks for anyone who can help,
I just got a used Zenbot 24x24 and I need to find the Mach3 config file, or any config file. I picked up an older Dell, installed LinuxCNC, and got all three axis working. I just need that config file and I think I'll be in business. I'm coming from the laser-world so a lot of this is new to me.
Thanks for anyone who can help,
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19188
- Thank you received: 6430
30 Sep 2018 07:01 #118220
by tommylight
Replied by tommylight on topic Zenbot 24x24 config file
You just need to spend some 20 to 40 minutes reading how to calibrate each axis.
Please Log in or Create an account to join the conversation.
Time to create page: 0.057 seconds