× Forum Header

PINOUT SERIAL DB 25 E DB 9

More
06 Jun 2022 21:33 #244692 by clayd_lopunk
Hi guys,
i would try to install linuxcnc on my cnc. I have to find the pinout of my serial cables connected to the cnc.
The cables are db25 and db9, they are connected to a control board that I have to bypass to exit on linuxcnc.
How can I find the configuration of my serial, I have verified but in the wiring diagram I am missing the pinouts.
Anyone know a software to monitor them from the original control? Or another way?


thanks guys !!
Alexander

Please Log in or Create an account to join the conversation.

More
06 Jun 2022 23:17 #244695 by tommylight
LinuxCNC does not work with serial for machine control, it is way to slow and no real time capabilities.
Get us some pictures of the control board and drives and wiring, most probably there are other ways of using it.

Please Log in or Create an account to join the conversation.

More
08 Jun 2022 20:31 #244778 by clayd_lopunk
Hi Tommy,
I have the wiring diagram, with the photos of the drives cards but I cannot share it in public. If I send it to you in private could you help me?

Please Log in or Create an account to join the conversation.

More
08 Jun 2022 20:42 #244779 by tommylight
Is it a nuclear bomb?????
No private, nothing.

Please Log in or Create an account to join the conversation.

More
09 Jun 2022 19:29 - 09 Jun 2022 19:30 #244813 by clayd_lopunk
xD sorry Tommy but in the wire diagram it is expressly written that it cannot be shared. The control is of an owner company. I will try to upload some photos with the connection cables.
Thanks
Last edit: 09 Jun 2022 19:30 by clayd_lopunk.

Please Log in or Create an account to join the conversation.

Time to create page: 0.138 seconds
Powered by Kunena Forum