×
Forum Header
Linuxcnc no connection
- Simon-m01
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
10 Oct 2022 06:22 #253848
by Simon-m01
Linuxcnc no connection was created by Simon-m01
Hello, i have an old PC with parallelport built in the Mainboard. The adress PC Style is 0x378 shown with dmesg. Now my Problem is, i have no connection to my stepper motors. I think the Problem is the connection from the PC to the breakoutboard. I have two types of breakoutboards which i can use. A China db25-1205 Board. And a mach3 v2.1 board. Can somebody help me.
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19408
- Thank you received: 6507
10 Oct 2022 11:01 #253861
by tommylight
Replied by tommylight on topic Linuxcnc no connection
Pictures of drive and bob wiring?
Is the bob powered by 5V ?
Is the bob powered by 5V ?
Please Log in or Create an account to join the conversation.
Time to create page: 0.047 seconds