×
Forum Header
spindle PWM => spindle pop-up
- BigJohnT
-
- Offline
- Administrator
-
Less
More
- Posts: 7000
- Thank you received: 1175
12 Mar 2011 12:32 #7752
by BigJohnT
Replied by BigJohnT on topic Re:spindle PWM => spindle pop-up
The official bug report link is on the Community page. I've posted a note on the IRC emc-devel channel.
Also note that you can download via git and create a RIP (Run In Place) version of EMC so you can modify and or fix things then run the software.
John
Also note that you can download via git and create a RIP (Run In Place) version of EMC so you can modify and or fix things then run the software.
John
Please Log in or Create an account to join the conversation.
- BigJohnT
-
- Offline
- Administrator
-
Less
More
- Posts: 7000
- Thank you received: 1175
12 Mar 2011 15:58 #7754
by BigJohnT
Replied by BigJohnT on topic Re:spindle PWM => spindle pop-up
Wayne,
I just thought I'd let you know that micges (IRC name) has patched the 2.4 branch to fix the bug you have found. To get that patch before the next release you can use git to download the 2.4 branch and use a RIP.
John
I just thought I'd let you know that micges (IRC name) has patched the 2.4 branch to fix the bug you have found. To get that patch before the next release you can use git to download the 2.4 branch and use a RIP.
John
Please Log in or Create an account to join the conversation.
- Rick G
-
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 155
13 Mar 2011 09:13 #7774
by Rick G
Replied by Rick G on topic Re:spindle PWM => spindle pop-up
John,
Good call, fast fix!
Rick
Good call, fast fix!
Rick
Please Log in or Create an account to join the conversation.
Time to create page: 0.059 seconds