Remora - ethernet

That dev branch is / was highly experimental. I will come back to a W5500 driver module for the Mbed based Remora boards. Just a long list on the To Do items ATM.

I'd start looking at your max configuration to ensure that the joint can try and reduce the following error.

I've had a quick look at some of the recent config examples and the velocity configs is not what I'd normally suggest.

[TRAJ] MAX_LINEAR_VELOCITY < [JOINT] MAX_VELOCITY
STEPGEN_MAX_ACCEL > 1.2 x MAX_ACCELERATION

This stops the MAX_LINEAR_VELOCITY from overriding the [JOINT] MAX_VELOCITY.

-
Santa came early this year, also brought a Zoyi ZT-703S osciloscope!

alright tommy! 

what board do you want it for? looks like i didnt make .bin files for anything yet

No idea!
I have:
ESP8266
ESP32 wroom
Octopus <inside a Voron 2.4 so not comming out
Several St32xxx on other Vorons all yanked out of Creality printers
Trying to order SKR1.4 to play with.
What boards are being developed here for this? I have seen several, but can not recall where and for exactly what.

i only have the both octopus, and a few nucleo working, only stm32f4 stuff at the moment