Remora - ethernet NVEM / EC300 / EC500 cnc board

Scotta, could you clear this doubt for me? Regarding the stepgendma with the 407, it does not generate the pulses, I know that you did the programming so that the pulses were generated without using Linux CNC, only with testing, but even that is not working, could you tell me why? Or do you have any configuration that is working for a study basis?

Have you tried using the example configs? I have had no issues getting it to generate motion... I am however having some weird behaviour (as previously mentioned)

Could you send me a copy so we can study it? I'm not even able to generate pulses, I mean with the DMAstepgen study configuration for the 407, this one, github.com/scottalford75/Remora-EC500-DMAstepgen

The configs used are attached to my first comment. Both the config for the NVEM and the config for linuxcnc.

I think you are using the rt1052, I am studying the configuration that scotta left for use with DMAstepgen but using the stm32f407, however this is not generating any pulses, I know that it is in a configuration where there is no need to use Linux cnc, but even so I can't even get the pulse to start studying and who knows how to run Linux cnc with it, follow the link I'm studying again, github.com/scottalford75/Remora-EC500-DMAstepgen

Apologies, missed that you were using the older board. Are you certain that you do indeed have a 407? That'd be pretty unusual if you recently obtained it as they were discontinued a long time ago now.