Remora - ethernet NVEM / EC300 / EC500 cnc board

Hey Scott,
Sorry to bug you again, but just wanted to let you know I finally managed to flash the firmware and ping 10.10.10.10! Next up is diving into the LinuxCNC side of things.

I’m planning to document everything I did to get it all working and might make a YouTube video showing the steps once my exams are out of the way next week. Also, I was thinking it’d be cool to contribute to the project documentation if there’s any way I can help out.


Thanks again for all your help – really appreciate it!

Great to hear and any help is greatly appreciated. Cakeslob as also been helping out the documentation.

It would be great to document how you got the probe up and running. This seems to be the hardest part for everyone with these boards, just getting the board to flash successfully can be a challenge.

Yeah MrDe, if you can do some kind of write up with the flashing thing, that would be great. Im dont really know what the situation is for that

hello
i have an nvem card based on rt1052 but i can't flash it with st link, the card is not detected, i tried with a card with a stm32f401 and it is detected?
 

Hi, you cannot use ST-Link utility to flash the RT1052. You will need to use pyOCD with an ST-link (probably need to flash the CMSIS-DAP firmware).

github.com/scottalford75/Remora-RT1052/tree/main/CMSIS-DAP

too complicated for me, there is no video or tutorial?
thanks