Remora - ethernet NVEM / EC300 / EC500 cnc board

de.aliexpress.com/item/1005003536896114.html this board if in stock will be a slam dunk for LCNC + Remora

H5 ARM SOC with an STM32F405, Linux on the H5 and Remora on the STM32.
linux-sunxi.org/H5

The only down side is 1GB of RAM.

Manta M4P/M8P Control Board with CB1/CM4
biqu.equipment/products/manta-m4p-m8p

CB1 Allwinner H616 Linux control board for $27 that plugs into a 4 or 8 axis STM32 Remora controller board Manta 4 ($40) or Manta 8 ($98)

Allwinner H616
linux-sunxi.org/H616#Documentation

I have to confirm that the ARM SOC connects to the STM32 via SPI or we will need some jumpers on the last two sets of boards that I posted today.

STM32Gx
www.st.com/en/microcontrollers-microproc.../stm32g0-series.html

Well the EC500s I ordered from cncboy store on Aliexpress have actually been posted. Don't know if it is of any use anymore but I'll let you know what's in them when they arrive. Cheers to everyone for all of the work they are putting in, it's very much appreciated.

Made this sticky, lots of interest, easier to find.

Does it have an actual shipping event or just say posted ??

Murphy wrote:

Does it have an actual shipping event or just say posted ??
 

It has given me the option to track the order and shows it processing at the sorting center... So anything is possible image missing /media/kunena/emoticons/smile.png