Gcode plasma

beauxnez
Offline
Premium Member

9 years 6 months ago - 9 years 6 months ago #92363 by beauxnez

Replied by beauxnez on topic Gcode plasma

tommylight wrote: inkscape.org/en/
forum.linuxcnc.org/40-subroutines-and-ng...-is-features-renamed

Open a terminal and type : sudo apt-get install inkscape
press Y and enter.

I think I have to find?

Attachments:

Last edit: 9 years 6 months ago by beauxnez.

Please Log in or Create an account to join the conversation.

rodw
Offline
Platinum Member

9 years 6 months ago #92369 by rodw

Replied by rodw on topic Gcode plasma

The first 4 files of John's are his configuration and I think a screen. The touchoff.ngc is the touchoff gcode (which is what you want) and the next file is the post processor he uses with Sheetcam.

Please Log in or Create an account to join the conversation.

Time to create page: 0.142 seconds