Forum Menu

halui.mdi-command-NN pins not showing up

More
1 year 2 months ago #334165 by xunil
Replied by xunil on topic halui.mdi-command-NN pins not showing up
Thanks for the heads up! I don't think that would affect whether the mdi-command-NN pins would show up or not; even if don't load the PyVCP panel, I still don't see the pins exposed by halui.

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #334179 by JT
Replied by JT on topic halui.mdi-command-NN pins not showing up
There is something weird going on, I'm trying to duplicate the issue and some configurations mdi works and some do not.

JT

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #334181 by JT
Replied by JT on topic halui.mdi-command-NN pins not showing up
Changing A to X and the mdi commands show up, changing back to an angular axis and the mdi commands don't show up.

JT

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #334194 by andypugh
Replied by andypugh on topic halui.mdi-command-NN pins not showing up

Changing A to X and the mdi commands show up, changing back to an angular axis and the mdi commands don't show up.

 
Thats more than a bit wierd. 

Any clues from starting LinuxCNC at the command line? It sounds like it is giving up before parsing the MDI_COMMAND lines. 

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #334198 by JT
Replied by JT on topic halui.mdi-command-NN pins not showing up
Dunno if this is a clue or not but <commandline>:0: halui exited without becoming ready seems odd.
Code:
LINUXCNC - 2.9.0~pre1+git20230208.f1270d6ed7 Machine configuration directory is '/home/john/linuxcnc/configs/flex_examples/starters/Lathe' Machine configuration file is 'lathe.ini' Starting LinuxCNC... <commandline>:0: halui exited without becoming ready linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Note: Using POSIX realtime Found file(REL): ./main.hal identityKinematicsSetup: coordinates:AZ    Joint 0 ==> Axis A    Joint 1 ==> Axis Z identityKinematicsSetup: Recommend: kinstype=both

JT

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #334199 by JT
Replied by JT on topic halui.mdi-command-NN pins not showing up
That line does not show up if the axes are all linear.

JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.068 seconds
Powered by Kunena Forum