Ladder Variable Assignment

Start
Prev
1
Next
End

LAIR82
Offline
Platinum Member

18 Sep 2012 11:48 #24355 by LAIR82

Ladder Variable Assignment was created by LAIR82

Hello Guys,

Question in regards to the variable assignment function in ladder, do the assignments latch "on" when given an input and must have something to turn them off?

Thanks

Rick

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

18 Sep 2012 12:12 #24356 by BigJohnT

Replied by BigJohnT on topic Re:Ladder Variable Assignment

When you assign a value to something with the variable assignment block it stays at that value until you assign a different value. The values are retained even after a shut down of LinuxCNC.

John

Please Log in or Create an account to join the conversation.

LAIR82
Offline
Platinum Member

18 Sep 2012 12:20 #24358 by LAIR82

Replied by LAIR82 on topic Re:Ladder Variable Assignment

Ok, Thanks John, I was wondering why they were not shutting off when their respective input was off.

Thanks again,

Rick

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.168 seconds