Classicladder editor - outside of LinuxCnc

Start
Prev
1
Next
End

mariusl
Topic Author
Offline
Platinum Member

03 Mar 2013 20:13 #30793 by mariusl

Classicladder editor - outside of LinuxCnc was created by mariusl

Hi
Does anyone know of an ladder editor that can be used outside of LinuxCnc? I need to write some stuff without having a system to test on or load the ladder.

Regards
Marius

www.bluearccnc.com

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

03 Mar 2013 20:21 #30794 by BigJohnT

Replied by BigJohnT on topic Classicladder editor - outside of LinuxCnc

Possibly the original classicladder editor. I'm not sure what platforms classicladder supports.

John

Please Log in or Create an account to join the conversation.

mariusl
Topic Author
Offline
Platinum Member

03 Mar 2013 20:27 #30795 by mariusl

Replied by mariusl on topic Classicladder editor - outside of LinuxCnc

Hi John,
Any idea where I could haul it from?

Regards
Marius

www.bluearccnc.com

Please Log in or Create an account to join the conversation.

BigJohnT
Offline
Administrator

03 Mar 2013 20:33 #30796 by BigJohnT

Replied by BigJohnT on topic Classicladder editor - outside of LinuxCnc

I assume the original author of the software has web presence somewhere, the original software was standalone. Google for classicladder.

John

Please Log in or Create an account to join the conversation.

mariusl
Topic Author
Offline
Platinum Member

03 Mar 2013 21:00 #30799 by mariusl

Replied by mariusl on topic Classicladder editor - outside of LinuxCnc

Thanks John, found it here sites.google.com/site/classicladder/home

It loads the .clp file and I can see my stuff. I am sure it will work.

Regards
Marius

www.bluearccnc.com

The following user(s) said Thank You: akb1212

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.115 seconds