Classic Ladder and thread timing

cmorley
Offline
Moderator

3 years 3 months ago #275378 by cmorley

Replied by cmorley on topic Classic Ladder and thread timing

Cl is limited to 1ms on the source.
From memory I couldn't get it to run efficiently at a faster rate.
You could change the source to try. I'll have to look for the file name when I get home.

cmorley
Offline
Moderator

3 years 3 months ago #275394 by cmorley

Replied by cmorley on topic Classic Ladder and thread timing

github.com/LinuxCNC/linuxcnc/blob/2.9/sr...er/module_hal.c#L119

The following user(s) said Thank You: tommylight, tropostudio

Time to create page: 1.018 seconds