LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

19 Jan 2025 15:09 #319374 by Hobbymate

Replied by Hobbymate on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

Very helpful community. No one say truth about Linux CNC is never working you need all time do development.

Please Log in or Create an account to join the conversation.

19 Jan 2025 15:20 #319375 by tommylight

Replied by tommylight on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

LinuxCNC is very good, and it always, always works.

Please Log in or Create an account to join the conversation.

19 Jan 2025 16:12 #319381 by Hobbymate

Replied by Hobbymate on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

It's working in velocity mode. I can't get it to work with one sensor and position mode. Please advise.

Please Log in or Create an account to join the conversation.

Moderators: piasdom

Time to create page: 0.050 seconds