Simple UART on Mesa 6i25 with 5i25 firmware

sirop
Topic Author
Offline
Elite Member

12 Mar 2016 22:11 #71512 by sirop

Replied by sirop on topic Simple UART on Mesa 6i25 with 5i25 firmware

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

13 Mar 2016 23:00 #71592 by andypugh

Replied by andypugh on topic Simple UART on Mesa 6i25 with 5i25 firmware

sirop wrote:
I prepared PktUART for machinekit: see the latest commits beginning from github.com/sirop/machinekit/commit/3446d...ee7211f94f1a1a2462d5 .

Would you be willing to create a patch for linuxCNC?

Please Log in or Create an account to join the conversation.

sirop
Topic Author
Offline
Elite Member

14 Mar 2016 04:25 #71601 by sirop

Replied by sirop on topic Simple UART on Mesa 6i25 with 5i25 firmware

andypugh wrote:

sirop wrote:
I prepared PktUART for machinekit: see the latest commits beginning from github.com/sirop/machinekit/commit/3446d...ee7211f94f1a1a2462d5 .

Would you be willing to create a patch for linuxCNC?

Before doing PR to machinekit or LinuxCNC I wanted to test the driver also on 1 Mps.
I'll receive the converter on Friday in the worst case.

And then - in a week or so - I'll do also a patch for LinuxCNC.

Please Log in or Create an account to join the conversation.

sirop
Topic Author
Offline
Elite Member

24 Mar 2016 13:43 #72089 by sirop

Replied by sirop on topic Simple UART on Mesa 6i25 with 5i25 firmware

andypugh wrote:

Would you be willing to create a patch for linuxCNC?

I uploaded github.com/sirop/linuxcnc-playground/com...af5faac9d90ae9811ebb
The build was tested with

./configure --with-realtime=uspace

I do not know however how to make a PR to github.com/LinuxCNC/linuxcnc
as github forwards me to my machinekit fork.

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.059 seconds