Forum Menu

Mesa 7i76e => hm2_eth: Unrecognized ethernet board

More
10 years 11 months ago #65483 by micges
Replied by micges on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
I'll add this to next version of mesaflash.

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #65540 by jtc
Replied by jtc on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
Thanks

unfortunately I can't did it today, and now only next week I can do that.
(previously I have tested with another 7i76e, so I suspected all the boards will need this operation)



João

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #65718 by sirhc
Replied by sirhc on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
Hmm.. same issue here. Also with a new 7i76e board. I'll try to find a windows machine.

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #65724 by tommylight
Replied by tommylight on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
I do not envy you, i needed one 2 weeks ago so i had to assemble a computer from parts i gathered in my workshop, was a traumatic experience going back to windoze, i hav waisted half of my life with it.
Regards,
Tom

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago - 10 years 11 months ago #65737 by PCW
Replied by PCW on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
Heres a Linux version of the setname program:

freeby.mesanet.com/setname

export PROTOCOL=direct
export INTERFACE=elbp16
export IPADDR=192.168.1.121
./setname 7I76E-16

setname is statically linked so should run on most linux systems
Last edit: 10 years 11 months ago by PCW. Reason: fix url
The following user(s) said Thank You: sirhc

Please Log in or Create an account to join the conversation.

More
10 years 11 months ago #65751 by sirhc
Replied by sirhc on topic Mesa 7i76e => hm2_eth: Unrecognized ethernet board
That worked for me! Thanks

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson
Time to create page: 0.269 seconds
Powered by Kunena Forum