LinuxCNC torque readout and mesa cards

29 Jun 2018 14:22 #113097 by PCW

Replied by PCW on topic LinuxCNC torque readout and mesa cards

The bitfile is 7i76e_7i76x1_7i74x1D.bit in the support zipfile

The following user(s) said Thank You: dom96

Please Log in or Create an account to join the conversation.

29 Jun 2018 14:26 #113098 by andypugh

Replied by andypugh on topic LinuxCNC torque readout and mesa cards

PCW wrote:
The bitfile is 7i76e_7i76x1_7i74x1D.bit in the support zipfile

Isn't that Smart-serial on the 7i74? My impression was that the OP wants SSI?

The following user(s) said Thank You: dom96

Please Log in or Create an account to join the conversation.

29 Jun 2018 15:38 - 29 Jun 2018 17:46 #113099 by PCW

Replied by PCW on topic LinuxCNC torque readout and mesa cards

Ahh thats right, I have a 7I92 config for this but not 7I76E, I'll cobble one up sometime today:

freeby.mesanet.com/7i76e_7i76x1_7i74x1SSID.bit

Last edit: 29 Jun 2018 17:46 by PCW.

The following user(s) said Thank You: dom96

Please Log in or Create an account to join the conversation.

30 Jun 2018 14:36 #113131 by dom96

Replied by dom96 on topic LinuxCNC torque readout and mesa cards

Thank you so much for the help

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.065 seconds