Mesa 7i43 (2port parallel) 400K with bitfile SVST2_4_7i47 using PnCConf

mane
Offline
Senior Member

01 Mar 2019 16:59 #127440 by mane

Replied by mane on topic Mesa 7i43 (2port parallel) 400K with bitfile SVST2_4_7i47 using PnCConf

Now i tried the dmesg command as written in the manual.
Mesa HostMot2 Driver dmesg

[ 1432.442089] hm2: loading Mesa HostMot2 driver version 0.15
[ 1432.445131] hm2_7i43: loading HostMot2 Mesa 7i43 driver version 0.3
[ 1432.992200] hm2/hm2_7i43.0: 48 I/O Pins used:
[ 1432.992208] hm2/hm2_7i43.0:     IO Pin 000 (P4-01): IOPort
[ 1432.992213] hm2/hm2_7i43.0:     IO Pin 001 (P4-03): IOPort
[ 1432.992217] hm2/hm2_7i43.0:     IO Pin 002 (P4-05): IOPort
[ 1432.992222] hm2/hm2_7i43.0:     IO Pin 003 (P4-07): IOPort
[ 1432.992226] hm2/hm2_7i43.0:     IO Pin 004 (P4-09): IOPort
[ 1432.992231] hm2/hm2_7i43.0:     IO Pin 005 (P4-11): IOPort
[ 1432.992235] hm2/hm2_7i43.0:     IO Pin 006 (P4-13): IOPort
[ 1432.992240] hm2/hm2_7i43.0:     IO Pin 007 (P4-15): IOPort
[ 1432.992245] hm2/hm2_7i43.0:     IO Pin 008 (P4-17): IOPort
[ 1432.992250] hm2/hm2_7i43.0:     IO Pin 009 (P4-19): IOPort
[ 1432.992254] hm2/hm2_7i43.0:     IO Pin 010 (P4-21): IOPort
[ 1432.992259] hm2/hm2_7i43.0:     IO Pin 011 (P4-23): IOPort
[ 1432.992263] hm2/hm2_7i43.0:     IO Pin 012 (P4-25): IOPort
[ 1432.992267] hm2/hm2_7i43.0:     IO Pin 013 (P4-27): IOPort
[ 1432.992272] hm2/hm2_7i43.0:     IO Pin 014 (P4-29): IOPort
[ 1432.992276] hm2/hm2_7i43.0:     IO Pin 015 (P4-31): IOPort
[ 1432.992283] hm2/hm2_7i43.0:     IO Pin 016 (P4-33): IOPort
[ 1432.992288] hm2/hm2_7i43.0:     IO Pin 017 (P4-35): IOPort
[ 1432.992293] hm2/hm2_7i43.0:     IO Pin 018 (P4-37): IOPort
[ 1432.992297] hm2/hm2_7i43.0:     IO Pin 019 (P4-39): IOPort
[ 1432.992301] hm2/hm2_7i43.0:     IO Pin 020 (P4-41): IOPort
[ 1432.992306] hm2/hm2_7i43.0:     IO Pin 021 (P4-43): IOPort
[ 1432.992310] hm2/hm2_7i43.0:     IO Pin 022 (P4-45): IOPort
[ 1432.992315] hm2/hm2_7i43.0:     IO Pin 023 (P4-47): IOPort
[ 1432.992321] hm2/hm2_7i43.0:     IO Pin 024 (P3-01): StepGen #0, pin Step (Output)
[ 1432.992326] hm2/hm2_7i43.0:     IO Pin 025 (P3-03): StepGen #0, pin Direction (Output)
[ 1432.992331] hm2/hm2_7i43.0:     IO Pin 026 (P3-05): IOPort
[ 1432.992336] hm2/hm2_7i43.0:     IO Pin 027 (P3-07): IOPort
[ 1432.992340] hm2/hm2_7i43.0:     IO Pin 028 (P3-09): IOPort
[ 1432.992345] hm2/hm2_7i43.0:     IO Pin 029 (P3-11): IOPort
[ 1432.992350] hm2/hm2_7i43.0:     IO Pin 030 (P3-13): StepGen #1, pin Step (Output)
[ 1432.992355] hm2/hm2_7i43.0:     IO Pin 031 (P3-15): StepGen #1, pin Direction (Output)
[ 1432.992360] hm2/hm2_7i43.0:     IO Pin 032 (P3-17): IOPort
[ 1432.992364] hm2/hm2_7i43.0:     IO Pin 033 (P3-19): IOPort
[ 1432.992369] hm2/hm2_7i43.0:     IO Pin 034 (P3-21): IOPort
[ 1432.992373] hm2/hm2_7i43.0:     IO Pin 035 (P3-23): IOPort
[ 1432.992378] hm2/hm2_7i43.0:     IO Pin 036 (P3-25): StepGen #2, pin Step (Output)
[ 1432.992384] hm2/hm2_7i43.0:     IO Pin 037 (P3-27): StepGen #2, pin Direction (Output)
[ 1432.992388] hm2/hm2_7i43.0:     IO Pin 038 (P3-29): IOPort
[ 1432.992393] hm2/hm2_7i43.0:     IO Pin 039 (P3-31): IOPort
[ 1432.992397] hm2/hm2_7i43.0:     IO Pin 040 (P3-33): IOPort
[ 1432.992402] hm2/hm2_7i43.0:     IO Pin 041 (P3-35): IOPort
[ 1432.992406] hm2/hm2_7i43.0:     IO Pin 042 (P3-37): IOPort
[ 1432.992411] hm2/hm2_7i43.0:     IO Pin 043 (P3-39): IOPort
[ 1432.992415] hm2/hm2_7i43.0:     IO Pin 044 (P3-41): IOPort
[ 1432.992420] hm2/hm2_7i43.0:     IO Pin 045 (P3-43): IOPort
[ 1432.992424] hm2/hm2_7i43.0:     IO Pin 046 (P3-45): IOPort
[ 1432.992428] hm2/hm2_7i43.0:     IO Pin 047 (P3-47): IOPort
[ 1432.992522] hm2/hm2_7i43.0: registered
[ 1432.992527] hm2_7i43.0: board at (ioaddr=0x0378, ioaddr_hi=0x0778, epp_wide ON) found

This gets me all the information i wanted so far.
Many thanks to all hints.

Please Log in or Create an account to join the conversation.

PCW
Away
Moderator

01 Mar 2019 17:53 #127447 by PCW

Replied by PCW on topic Mesa 7i43 (2port parallel) 400K with bitfile SVST2_4_7i47 using PnCConf

Yeah its easy to get this wrong:

RTAI based LinuxCNC installations log driver info to the kernel log (dmesg)
but Preempt-RT based installations log driver info to the console

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.087 seconds