Mesa 7i76E estop

rodw
Offline
Platinum Member

26 Dec 2020 01:29 #193206 by rodw

Replied by rodw on topic Mesa 7i76E estop

tommylight wrote:
Should be easy enough to do using normal inputs tied to pause and "mesage" to alert on what axis drive faulted, but that would also need another button to reset the "enable" on the drives and be interlocked with the normal enable, or have 3 or 4 separate buttons one for each axis drive, since we have enough IO pins.

Once all errors were resolved, it would reset the pin and it would start cutting without any further action by th eoperator.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

26 Dec 2020 12:37 #193224 by tommylight

Replied by tommylight on topic Mesa 7i76E estop

It should be possible, i am pretty sure, but i refrain from giving to much liberties to machines, do not want to one day see my plasma machines reassembled themself's as a BatleBot and are waiting for me to enter the shop !

Please Log in or Create an account to join the conversation.

Moderators: PCW, jmelson

Time to create page: 0.129 seconds