computer / linuxcnc unable to detect mesanet 6i24 board

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 19:25 #164488 by owhite
People,

My computer is not recognizing my mesanet 6i24 board.

Background:
I install linuxcnc version XX using this documentation on to a HP ProDesk 800G1 Tower.

I couldnt find in the HP's bios setup that had anything to do with PCI. The 6i24 jumpers are in the factory default positions.

No other boards are plugged into the pci slots

I get this from mesaflash:
$ ./mesaflash --device 6i24 --readhmid
No 6I24 board found

The output of lspci and dmesg are below. Does anyone have suggestions for what I could test?

thanks for your help,
owen
======================== LSPCI ===========================

00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Q87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
02:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
03:00.0 DPIO module: Device 2718:5124 (rev 01)

===================== DMESG ===========================
[    0.000000] Linux version 4.19.1-rt3 (owhite@laserCNC) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #1 SMP PREEMPT RT Fri Apr 10 16:10:13 EDT 2020
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.1-rt3 root=UUID=17a7645c-87bb-451f-8b7e-4cab0efafd24 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000050000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c69bcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c69bd000-0x00000000c69c3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c69c4000-0x00000000c6e08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c6e09000-0x00000000c71bdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c71be000-0x00000000d985efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d985f000-0x00000000d98eafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d98eb000-0x00000000d991cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d991d000-0x00000000d9a07fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9a08000-0x00000000d9ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xc6662018-0xc6672057] usable ==> usable
[    0.000000] e820: update [mem 0xc6662018-0xc6672057] usable ==> usable
[    0.000000] e820: update [mem 0xc6652018-0xc6661c57] usable ==> usable
[    0.000000] e820: update [mem 0xc6652018-0xc6661c57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000004efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000004f000-0x000000000004ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000050000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000c6652017] usable
[    0.000000] reserve setup_data: [mem 0x00000000c6652018-0x00000000c6661c57] usable
[    0.000000] reserve setup_data: [mem 0x00000000c6661c58-0x00000000c6662017] usable
[    0.000000] reserve setup_data: [mem 0x00000000c6662018-0x00000000c6672057] usable
[    0.000000] reserve setup_data: [mem 0x00000000c6672058-0x00000000c69bcfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c69bd000-0x00000000c69c3fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000c69c4000-0x00000000c6e08fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000c6e09000-0x00000000c71bdfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000c71be000-0x00000000d985efff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d985f000-0x00000000d98eafff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d98eb000-0x00000000d991cfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000d991d000-0x00000000d9a07fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000d9a08000-0x00000000d9ffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dc000000-0x00000000de1fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xd9903000  ACPI 2.0=0xd9903000  SMBIOS=0xd9f7e498  MPS=0xf4e60 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP EliteDesk 800 G1 TWR/18E4, BIOS L01 v02.65 07/13/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3292.399 MHz processor
[    0.002073] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002074] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002080] last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.002084] MTRR default type: uncachable
[    0.002084] MTRR fixed ranges enabled:
[    0.002085]   00000-9FFFF write-back
[    0.002085]   A0000-BFFFF uncachable
[    0.002086]   C0000-CFFFF write-protect
[    0.002086]   D0000-DFFFF uncachable
[    0.002087]   E0000-FFFFF write-protect
[    0.002087] MTRR variable ranges enabled:
[    0.002088]   0 base 0000000000 mask 7C00000000 write-back
[    0.002089]   1 base 0400000000 mask 7FE0000000 write-back
[    0.002089]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.002090]   3 base 00DC000000 mask 7FFC000000 uncachable
[    0.002090]   4 base 041FE00000 mask 7FFFE00000 uncachable
[    0.002090]   5 disabled
[    0.002091]   6 disabled
[    0.002091]   7 disabled
[    0.002091]   8 disabled
[    0.002091]   9 disabled
[    0.002849] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002926] total RAM covered: 16318M
[    0.003151] Found optimal setting for mtrr clean up
[    0.003152]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.003825] e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
[    0.003829] last_pfn = 0xda000 max_arch_pfn = 0x400000000
[    0.007200] found SMP MP-table at [mem 0x000f4e50-0x000f4e5f] mapped at [(____ptrval____)]
[    0.007216] Scanning 1 areas for low memory corruption
[    0.007218] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.007220] Using GB pages for direct mapping
[    0.007221] BRK [0x26c401000, 0x26c401fff] PGTABLE
[    0.007222] BRK [0x26c402000, 0x26c402fff] PGTABLE
[    0.007223] BRK [0x26c403000, 0x26c403fff] PGTABLE
[    0.007257] BRK [0x26c404000, 0x26c404fff] PGTABLE
[    0.007259] BRK [0x26c405000, 0x26c405fff] PGTABLE
[    0.007424] BRK [0x26c406000, 0x26c406fff] PGTABLE
[    0.007464] BRK [0x26c407000, 0x26c407fff] PGTABLE
[    0.007586] BRK [0x26c408000, 0x26c408fff] PGTABLE
[    0.007658] BRK [0x26c409000, 0x26c409fff] PGTABLE
[    0.007736] BRK [0x26c40a000, 0x26c40afff] PGTABLE
[    0.007800] BRK [0x26c40b000, 0x26c40bfff] PGTABLE
[    0.007858] Secure boot disabled
[    0.007859] RAMDISK: [mem 0x1baef000-0x3fffdfff]
[    0.007863] ACPI: Early table checksum verification disabled
[    0.007866] ACPI: RSDP 0x00000000D9903000 000024 (v02 HPQOEM)
[    0.007868] ACPI: XSDT 0x00000000D9903088 00008C (v01 HPQOEM SLIC-BPC 20150713 AMI  00010013)
[    0.007873] ACPI: FACP 0x00000000D9910FE8 00010C (v05 HPQOEM SLIC-BPC 20150713 AMI  00010013)
[    0.007877] ACPI: DSDT 0x00000000D99031A0 00DE46 (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112)
[    0.007879] ACPI: FACS 0x00000000D9A06080 000040
[    0.007881] ACPI: APIC 0x00000000D99110F8 000072 (v03 HPQOEM SLIC-BPC 20150713 AMI  00010013)
[    0.007882] ACPI: FPDT 0x00000000D9911170 000044 (v01 HPQOEM SLIC-BPC 20150713 AMI  00010013)
[    0.007884] ACPI: SSDT 0x00000000D99111B8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.007886] ACPI: SSDT 0x00000000D99116F8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.007888] ACPI: SSDT 0x00000000D99121D0 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20120711)
[    0.007890] ACPI: MCFG 0x00000000D9912398 00003C (v01 HPQOEM SLIC-BPC 20150713 MSFT 00000097)
[    0.007892] ACPI: HPET 0x00000000D99123D8 000038 (v01 HPQOEM SLIC-BPC 20150713 AMI. 00000005)
[    0.007894] ACPI: SSDT 0x00000000D9912410 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.007896] ACPI: SSDT 0x00000000D9912780 00348C (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.007898] ACPI: SSDT 0x00000000D9915C10 00668F (v01 COMPAQ WMI      00000001 MSFT 03000001)
[    0.007900] ACPI: SLIC 0x00000000D991C2A0 000176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
[    0.007902] ACPI: ASF! 0x00000000D991C418 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.007908] ACPI: Local APIC address 0xfee00000
[    0.007978] No NUMA configuration found
[    0.007978] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[    0.007986] NODE_DATA(0) allocated [mem 0x41fdd5000-0x41fdfffff]
[    0.008162] Zone ranges:
[    0.008163]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008163]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008164]   Normal   [mem 0x0000000100000000-0x000000041fdfffff]
[    0.008164]   Device   empty
[    0.008165] Movable zone start for each node
[    0.008167] Early memory node ranges
[    0.008168]   node   0: [mem 0x0000000000001000-0x000000000004efff]
[    0.008168]   node   0: [mem 0x0000000000050000-0x000000000009dfff]
[    0.008168]   node   0: [mem 0x0000000000100000-0x00000000c69bcfff]
[    0.008169]   node   0: [mem 0x00000000c69c4000-0x00000000c6e08fff]
[    0.008169]   node   0: [mem 0x00000000c71be000-0x00000000d985efff]
[    0.008169]   node   0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[    0.008170]   node   0: [mem 0x0000000100000000-0x000000041fdfffff]
[    0.008495] Reserved but unavailable: 27584 pages
[    0.008496] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[    0.008497] On node 0 totalpages: 4166208
[    0.008498]   DMA zone: 64 pages used for memmap
[    0.008498]   DMA zone: 22 pages reserved
[    0.008499]   DMA zone: 3996 pages, LIFO batch:0
[    0.008567]   DMA32 zone: 13843 pages used for memmap
[    0.008568]   DMA32 zone: 885924 pages, LIFO batch:63
[    0.023496]   Normal zone: 51192 pages used for memmap
[    0.023497]   Normal zone: 3276288 pages, LIFO batch:63
[    0.074883] Reserving Intel graphics memory at [mem 0xdc200000-0xde1fffff]
[    0.075067] ACPI: PM-Timer IO Port: 0x408
[    0.075068] ACPI: Local APIC address 0xfee00000
[    0.075074] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.075083] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.075085] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.075086] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.075086] ACPI: IRQ0 used by override.
[    0.075087] ACPI: IRQ9 used by override.
[    0.075088] Using ACPI (MADT) for SMP configuration information
[    0.075089] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.075093] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x22 (or later)
[    0.075094] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.075113] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.075114] PM: Registered nosave memory: [mem 0x0004f000-0x0004ffff]
[    0.075115] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.075115] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.075116] PM: Registered nosave memory: [mem 0xc6652000-0xc6652fff]
[    0.075117] PM: Registered nosave memory: [mem 0xc6661000-0xc6661fff]
[    0.075118] PM: Registered nosave memory: [mem 0xc6662000-0xc6662fff]
[    0.075118] PM: Registered nosave memory: [mem 0xc6672000-0xc6672fff]
[    0.075119] PM: Registered nosave memory: [mem 0xc69bd000-0xc69c3fff]
[    0.075120] PM: Registered nosave memory: [mem 0xc6e09000-0xc71bdfff]
[    0.075121] PM: Registered nosave memory: [mem 0xd985f000-0xd98eafff]
[    0.075122] PM: Registered nosave memory: [mem 0xd98eb000-0xd991cfff]
[    0.075122] PM: Registered nosave memory: [mem 0xd991d000-0xd9a07fff]
[    0.075122] PM: Registered nosave memory: [mem 0xd9a08000-0xd9ffefff]
[    0.075123] PM: Registered nosave memory: [mem 0xda000000-0xdbffffff]
[    0.075124] PM: Registered nosave memory: [mem 0xdc000000-0xde1fffff]
[    0.075124] PM: Registered nosave memory: [mem 0xde200000-0xf7ffffff]
[    0.075124] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.075125] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.075125] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.075125] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.075125] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.075126] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.075126] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.075126] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.075127] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.075127] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.075127] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.075131] [mem 0xde200000-0xf7ffffff] available for PCI devices
[    0.075131] Booting paravirtualized kernel on bare hardware
[    0.075133] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.075141] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8192 nr_cpu_ids:4 nr_node_ids:1
[    0.075280] percpu: Embedded 51 pages/cpu @(____ptrval____) s172032 r8192 d28672 u524288
[    0.075285] pcpu-alloc: s172032 r8192 d28672 u524288 alloc=1*2097152
[    0.075286] pcpu-alloc: [0] 0 1 2 3 
[    0.075302] Built 1 zonelists, mobility grouping on.  Total pages: 4101087
[    0.075303] Policy zone: Normal
[    0.075304] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.1-rt3 root=UUID=17a7645c-87bb-451f-8b7e-4cab0efafd24 ro quiet splash vt.handoff=1
[    0.078176] Calgary: detecting Calgary via BIOS EBDA area
[    0.078178] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.116534] Memory: 15707444K/16664832K available (14348K kernel code, 3463K rwdata, 4096K rodata, 2392K init, 6308K bss, 957388K reserved, 0K cma-reserved)
[    0.116625] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.116634] Kernel/User page tables isolation: enabled
[    0.124781] ftrace: allocating 40932 entries in 160 pages
[    0.138357] rcu: Preemptible hierarchical RCU implementation.
[    0.138357] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.138358] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.138358] 	No expedited grace period (rcu_normal_after_boot).
[    0.138358] 	Tasks RCU enabled.
[    0.138359] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.140563] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.140766] Console: colour dummy device 80x25
[    0.140776] console [tty0] enabled
[    0.140787] ACPI: Core revision 20180810
[    0.140960] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.140969] hpet clockevent registered
[    0.140974] APIC: Switch to symmetric I/O mode setup
[    0.141039] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.141394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.160974] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f75401710d, max_idle_ns: 440795310703 ns
[    0.160985] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.79 BogoMIPS (lpj=13169596)
[    0.160987] pid_max: default: 32768 minimum: 301
[    0.161016] Security Framework initialized
[    0.161016] Yama: becoming mindful.
[    0.161020] SELinux:  Initializing.
[    0.161042] AppArmor: AppArmor disabled by boot time parameter
[    0.165317] Dentry cache hash table entries: 2097152 (order: 13, 33554432 bytes)
[    0.169844] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.169889] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.169924] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.170122] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.170122] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.170126] mce: CPU supports 9 MCE banks
[    0.170133] CPU0: Thermal monitoring enabled (TM1)
[    0.170143] process: using mwait in idle threads
[    0.170145] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.170145] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.170147] Spectre V2 : Mitigation: Full generic retpoline
[    0.170147] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.170147] Speculative Store Bypass: Vulnerable
[    0.174593] Freeing SMP alternatives memory: 36K
[    0.176975] smpboot: CPU0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.197002] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.197020] ... version:                3
[    0.197021] ... bit width:              48
[    0.197022] ... generic registers:      8
[    0.197022] ... value mask:             0000ffffffffffff
[    0.197023] ... max period:             00007fffffffffff
[    0.197024] ... fixed-purpose events:   3
[    0.197024] ... event mask:             00000007000000ff
[    0.212990] rcu: Hierarchical SRCU implementation.
[    0.237462] random: crng done (trusting CPU's manufacturer)
[    0.249112] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.256986] smp: Bringing up secondary CPUs ...
[    0.321032] x86: Booting SMP configuration:
[    0.321034] .... node  #0, CPUs:      #1 #2 #3
[    0.449322] smp: Brought up 1 node, 4 CPUs
[    0.449322] smpboot: Max logical packages: 1
[    0.449322] smpboot: Total of 4 processors activated (26339.19 BogoMIPS)
[    0.452085] devtmpfs: initialized
[    0.452085] x86/mm: Memory block size: 128MB
[    0.458751] PM: Registering ACPI NVS region [mem 0xc69bd000-0xc69c3fff] (28672 bytes)
[    0.458751] PM: Registering ACPI NVS region [mem 0xd991d000-0xd9a07fff] (962560 bytes)
[    0.458751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.458751] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.458751] pinctrl core: initialized pinctrl subsystem
[    0.458751] RTC time: 19:13:01, date: 04/18/20
[    0.458751] NET: Registered protocol family 16
[    0.458751] audit: initializing netlink subsys (disabled)
[    0.458751] audit: type=2000 audit(1587237181.316:1): state=initialized audit_enabled=0 res=1
[    0.458751] cpuidle: using governor ladder
[    0.458751] cpuidle: using governor menu
[    0.461043] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.461044] ACPI: bus type PCI registered
[    0.461046] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.461189] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.461192] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.461201] PCI: Using configuration type 1 for base access
[    0.461224] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.469057] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.469057] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.469175] ACPI: Added _OSI(Module Device)
[    0.469176] ACPI: Added _OSI(Processor Device)
[    0.469177] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.469178] ACPI: Added _OSI(Processor Aggregator Device)
[    0.469179] ACPI: Added _OSI(Linux-Dell-Video)
[    0.469180] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.483804] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.487917] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.489153] ACPI: Dynamic OEM Table Load:
[    0.489159] ACPI: SSDT 0xFFFF99BE0C534400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.489815] ACPI: Dynamic OEM Table Load:
[    0.489819] ACPI: SSDT 0xFFFF99BE0C54C800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.490450] ACPI: Dynamic OEM Table Load:
[    0.490454] ACPI: SSDT 0xFFFF99BE0C4E5E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.491955] ACPI: Interpreter enabled
[    0.491986] ACPI: (supports S0 S3 S4 S5)
[    0.491987] ACPI: Using IOAPIC for interrupt routing
[    0.492026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.492400] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.510094] ACPI: Power Resource [FN00] (off)
[    0.510283] ACPI: Power Resource [FN01] (off)
[    0.510461] ACPI: Power Resource [FN02] (off)
[    0.510632] ACPI: Power Resource [FN03] (off)
[    0.510804] ACPI: Power Resource [FN04] (off)
[    0.512310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.512315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.512669] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.512903] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.512904] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.513567] PCI host bridge to bus 0000:00
[    0.513569] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.513570] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.513571] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.513572] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.513573] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.513574] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.513575] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.513576] pci_bus 0000:00: root bus resource [mem 0xde200000-0xfeafffff window]
[    0.513578] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.513584] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.513751] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.513759] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.513764] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.513767] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.513777] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.513929] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.513936] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.514118] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.514138] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.514192] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.514369] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.514388] pci 0000:00:16.0: reg 0x10: [mem 0xf7d40000-0xf7d4000f 64bit]
[    0.514445] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.514606] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[    0.514619] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
[    0.514625] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3e000-0xf7d3efff]
[    0.514820] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[    0.514837] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.514844] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3d000-0xf7d3dfff]
[    0.514852] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.514904] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.515072] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.515092] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c3ff]
[    0.515168] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.515347] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.515363] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.515418] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.515593] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.515662] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.515915] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.515983] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.516239] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.516259] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.516336] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.516518] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
[    0.516763] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.516778] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.516785] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.516792] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.516798] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.516805] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.516811] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff]
[    0.516844] pci 0000:00:1f.2: PME# supported from D3hot
[    0.517018] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.517035] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit]
[    0.517052] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.517342] acpiphp: Slot [1] registered
[    0.517348] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.517460] pci 0000:02:00.0: [104c:8240] type 01 class 0x060400
[    0.517600] pci 0000:02:00.0: supports D1 D2
[    0.517796] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.517801] pci 0000:00:1c.1:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.517856] pci_bus 0000:03: extended config space not accessible
[    0.517914] pci 0000:03:00.0: [2718:5124] type 00 class 0x110000
[    0.517941] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
[    0.518195] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.518206] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.519692] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.519767] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.519836] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.519905] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.519973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.520041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.520114] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.520182] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.521112] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.521112] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.521112] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.521112] vgaarb: loaded
[    0.521405] SCSI subsystem initialized
[    0.521417] libata version 3.00 loaded.
[    0.521417] ACPI: bus type USB registered
[    0.521417] usbcore: registered new interface driver usbfs
[    0.521417] usbcore: registered new interface driver hub
[    0.521417] usbcore: registered new device driver usb
[    0.521417] pps_core: LinuxPPS API ver. 1 registered
[    0.521417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.521417] PTP clock support registered
[    0.521417] EDAC MC: Ver: 3.0.0
[    0.521417] Registered efivars operations
[    0.521417] PCI: Using ACPI for IRQ routing
[    0.522293] PCI: pci_cache_line_size set to 64 bytes
[    0.522351] e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff]
[    0.522353] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.522354] e820: reserve RAM buffer [mem 0xc6652018-0xc7ffffff]
[    0.522356] e820: reserve RAM buffer [mem 0xc6662018-0xc7ffffff]
[    0.522357] e820: reserve RAM buffer [mem 0xc69bd000-0xc7ffffff]
[    0.522359] e820: reserve RAM buffer [mem 0xc6e09000-0xc7ffffff]
[    0.522360] e820: reserve RAM buffer [mem 0xd985f000-0xdbffffff]
[    0.522361] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[    0.522363] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    0.522627] NetLabel: Initializing
[    0.522628] NetLabel:  domain hash size = 128
[    0.522629] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.522643] NetLabel:  unlabeled traffic allowed by default
[    0.522689] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.522689] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.525010] clocksource: Switched to clocksource tsc-early
[    0.560916] VFS: Disk quotas dquot_6.6.0
[    0.560940] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.561090] pnp: PnP ACPI init
[    0.561294] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.561301] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.561429] pnp 00:01: can't evaluate _CRS: 12311
[    0.561520] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.561579] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.561688] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.561693] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.561921] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    0.561923] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    0.561928] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.562015] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.562112] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.562218] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.562223] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.562525] pnp 00:08: [dma 0 disabled]
[    0.562625] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.563541] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.563543] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.563544] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.563546] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.563548] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.563550] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.563552] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.563553] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.563555] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.563557] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.563559] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.563561] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.563566] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.564000] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.564005] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.564008] pnp: PnP ACPI: found 11 devices
[    0.572372] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.572384] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.572386] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.572387] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.572411] pci 0000:00:1c.0: BAR 14: assigned [mem 0xde200000-0xde3fffff]
[    0.572420] pci 0000:00:1c.0: BAR 15: assigned [mem 0xde400000-0xde5fffff 64bit pref]
[    0.572422] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.572424] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.572428] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.572432] pci 0000:00:1c.0:   bridge window [mem 0xde200000-0xde3fffff]
[    0.572436] pci 0000:00:1c.0:   bridge window [mem 0xde400000-0xde5fffff 64bit pref]
[    0.572441] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.572448] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.572460] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.572464] pci 0000:00:1c.1:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.572471] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.572472] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.572473] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.572474] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.572475] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.572476] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.572477] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.572478] pci_bus 0000:00: resource 11 [mem 0xde200000-0xfeafffff window]
[    0.572479] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.572480] pci_bus 0000:01: resource 1 [mem 0xde200000-0xde3fffff]
[    0.572481] pci_bus 0000:01: resource 2 [mem 0xde400000-0xde5fffff 64bit pref]
[    0.572483] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.572484] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.572598] NET: Registered protocol family 2
[    0.573194] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes)
[    0.574120] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.577201] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[    0.577758] TCP: Hash tables configured (established 131072 bind 65536)
[    0.578643] UDP hash table entries: 8192 (order: 8, 1048576 bytes)
[    0.579652] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes)
[    0.579875] NET: Registered protocol family 1
[    0.579886] NET: Registered protocol family 44
[    0.579896] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.604482] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 23527 usecs
[    0.628126] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 23073 usecs
[    0.628146] PCI: CLS 64 bytes, default 64
[    0.628218] Unpacking initramfs...
[   13.225510] Freeing initrd memory: 595004K
[   13.225514] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   13.225515] software IO TLB: mapped [mem 0xd585f000-0xd985f000] (64MB)
[   13.225942] Scanning for low memory corruption every 60 seconds
[   13.227599] Initialise system trusted keyrings
[   13.227610] Key type blacklist registered
[   13.227665] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[   13.235086] zbud: loaded
[   13.236603] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   13.237041] fuse init (API version 7.27)
[   13.237250] pstore: using deflate compression
[   13.239484] Key type asymmetric registered
[   13.239486] Asymmetric key parser 'x509' registered
[   13.239498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[   13.239548] io scheduler noop registered
[   13.239549] io scheduler deadline registered
[   13.239638] io scheduler cfq registered (default)
[   13.239639] io scheduler mq-deadline registered
[   13.240513] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.240659] efifb: probing for efifb
[   13.240662] efi: EFI_MEMMAP is not enabled.
[   13.240678] efifb: framebuffer at 0xe0000000, using 1876k, total 1875k
[   13.240679] efifb: mode is 800x600x32, linelength=3200, pages=1
[   13.240679] efifb: scrolling: redraw
[   13.240680] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   13.241528] Console: switching to colour frame buffer device 100x37
[   13.242186] fb0: EFI VGA frame buffer device
[   13.242199] intel_idle: MWAIT substates: 0x42120
[   13.242200] intel_idle: v0.4.1 model 0x3C
[   13.242837] intel_idle: lapic_timer_reliable_states 0xffffffff
[   13.243200] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[   13.243224] ACPI: Power Button [PWRB]
[   13.243331] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   13.243348] ACPI: Power Button [PWRF]
[   13.244908] thermal LNXTHERM:00: registered as thermal_zone0
[   13.244909] ACPI: Thermal Zone [TZ00] (28 C)
[   13.245337] thermal LNXTHERM:01: registered as thermal_zone1
[   13.245338] ACPI: Thermal Zone [TZ01] (30 C)
[   13.245655] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[   13.266103] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   13.270784] serial 0000:00:16.3: enabling device (0000 -> 0003)
[   13.291252] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[   13.291877] Linux agpgart interface v0.103
[   13.297665] loop: module loaded
[   13.298542] libphy: Fixed MDIO Bus: probed
[   13.298544] tun: Universal TUN/TAP device driver, 1.6
[   13.298633] PPP generic driver version 2.4.2
[   13.298753] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.298760] ehci-pci: EHCI PCI platform driver
[   13.299024] ehci-pci 0000:00:1a.0: EHCI Host Controller
[   13.299031] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   13.299041] ehci-pci 0000:00:1a.0: debug port 2
[   13.302962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[   13.303067] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[   13.317052] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   13.317148] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[   13.317150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.317151] usb usb1: Product: EHCI Host Controller
[   13.317152] usb usb1: Manufacturer: Linux 4.19.1-rt3 ehci_hcd
[   13.317153] usb usb1: SerialNumber: 0000:00:1a.0
[   13.317526] hub 1-0:1.0: USB hub found
[   13.317534] hub 1-0:1.0: 3 ports detected
[   13.318180] ehci-pci 0000:00:1d.0: EHCI Host Controller
[   13.318186] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   13.318196] ehci-pci 0000:00:1d.0: debug port 2
[   13.322098] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[   13.322257] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3b000
[   13.337054] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   13.337145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[   13.337147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.337148] usb usb2: Product: EHCI Host Controller
[   13.337149] usb usb2: Manufacturer: Linux 4.19.1-rt3 ehci_hcd
[   13.337150] usb usb2: SerialNumber: 0000:00:1d.0
[   13.337516] hub 2-0:1.0: USB hub found
[   13.337523] hub 2-0:1.0: 3 ports detected
[   13.337913] ehci-platform: EHCI generic platform driver
[   13.337941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.337946] ohci-pci: OHCI PCI platform driver
[   13.337975] ohci-platform: OHCI generic platform driver
[   13.337993] uhci_hcd: USB Universal Host Controller Interface driver
[   13.338311] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   13.338317] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[   13.339447] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[   13.339451] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[   13.339919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[   13.339921] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.339922] usb usb3: Product: xHCI Host Controller
[   13.339923] usb usb3: Manufacturer: Linux 4.19.1-rt3 xhci-hcd
[   13.339924] usb usb3: SerialNumber: 0000:00:14.0
[   13.340251] hub 3-0:1.0: USB hub found
[   13.340271] hub 3-0:1.0: 15 ports detected
[   13.345151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   13.345153] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[   13.345155] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[   13.345211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[   13.345212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.345213] usb usb4: Product: xHCI Host Controller
[   13.345214] usb usb4: Manufacturer: Linux 4.19.1-rt3 xhci-hcd
[   13.345215] usb usb4: SerialNumber: 0000:00:14.0
[   13.345553] hub 4-0:1.0: USB hub found
[   13.345567] hub 4-0:1.0: 6 ports detected
[   13.346265] usb: port power management may be unreliable
[   13.346795] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   13.349843] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.349934] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.350176] mousedev: PS/2 mouse device common for all mice
[   13.350463] rtc_cmos 00:02: RTC can wake from S4
[   13.350738] rtc_cmos 00:02: registered as rtc0
[   13.350779] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   13.350797] i2c /dev entries driver
[   13.351000] device-mapper: uevent: version 1.0.3
[   13.351170] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[   13.351174] intel_pstate: Intel P-state driver initializing
[   13.351959] NET: Registered protocol family 10
[   13.365244] Segment Routing with IPv6
[   13.365271] NET: Registered protocol family 17
[   13.365417] Key type dns_resolver registered
[   13.366029] RAS: Correctable Errors collector initialized.
[   13.366104] microcode: sig=0x306c3, pf=0x2, revision=0x1a
[   13.366270] microcode: Microcode Update Driver: v2.2.
[   13.366316] sched_clock: Marking stable (13366037433, 227715)->(13475307858, -109042710)
[   13.366795] registered taskstats version 1
[   13.366810] Loading compiled-in X.509 certificates
[   13.367465] Loaded X.509 cert 'Build time autogenerated kernel key: 39b83844da12734c60cec0a02dbe79061a87f2c3'
[   13.367506] zswap: loaded using pool lzo/zbud
[   13.380187] Key type big_key registered
[   13.380191] Key type trusted registered
[   13.386355] Key type encrypted registered
[   13.386373] ima: No TPM chip found, activating TPM-bypass!
[   13.386379] ima: Allocated hash algorithm: sha1
[   13.386404] evm: Initialising EVM extended attributes:
[   13.386404] evm: security.selinux
[   13.386405] evm: security.SMACK64
[   13.386406] evm: security.SMACK64EXEC
[   13.386406] evm: security.SMACK64TRANSMUTE
[   13.386407] evm: security.SMACK64MMAP
[   13.386407] evm: security.apparmor
[   13.386408] evm: security.ima
[   13.386408] evm: security.capability
[   13.386409] evm: HMAC attrs: 0x1
[   13.387021]   Magic number: 0:524:243
[   13.387162] rtc_cmos 00:02: setting system clock to 2020-04-18 19:13:14 UTC (1587237194)
[   13.609520] Freeing unused decrypted memory: 2040K
[   13.653018] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   13.673006] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   13.681006] usb 3-6: new high-speed USB device number 2 using xhci_hcd
[   13.809373] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[   13.809375] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   13.809822] hub 1-1:1.0: USB hub found
[   13.809856] hub 1-1:1.0: 6 ports detected
[   13.829394] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[   13.829396] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   13.829828] hub 2-1:1.0: USB hub found
[   13.830000] hub 2-1:1.0: 8 ports detected
[   13.839757] usb 3-6: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
[   13.839759] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.839760] usb 3-6: Product: 802.11 n WLAN
[   13.839761] usb 3-6: Manufacturer: MediaTek
[   13.839762] usb 3-6: SerialNumber: 1.0
[   13.868634] Freeing unused kernel image memory: 2392K
[   13.868809] Write protecting the kernel read-only data: 20480k
[   13.871634] Freeing unused kernel image memory: 2008K
[   13.877552] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   13.877554] x86/mm: Checking user space page tables
[   13.883348] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   13.883350] Run /init as init process
[   13.969016] usb 3-11: new low-speed USB device number 3 using xhci_hcd
[   14.113419] ahci 0000:00:1f.2: version 3.0
[   14.113755] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x5 impl SATA mode
[   14.113757] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[   14.125954] usb 3-11: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[   14.125956] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   14.125957] usb 3-11: Product: USB Keyboard
[   14.125958] usb 3-11: Manufacturer: SEM
[   14.135445] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   14.135446] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   14.136790] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[   14.169063] scsi host0: ahci
[   14.169476] scsi host1: ahci
[   14.173011] scsi host2: ahci
[   14.173417] scsi host3: ahci
[   14.173742] scsi host4: ahci
[   14.173964] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 25
[   14.173965] ata2: DUMMY
[   14.173977] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 25
[   14.173978] ata4: DUMMY
[   14.173979] ata5: DUMMY
[   14.233781] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[   14.253016] tsc: Refined TSC clocksource calibration: 3292.375 MHz
[   14.253022] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75298baf3, max_idle_ns: 440795322961 ns
[   14.253032] clocksource: Switched to clocksource tsc
[   14.257026] usb 3-12: new low-speed USB device number 4 using xhci_hcd
[   14.282539] VFIO - User Level meta-driver version: 0.3
[   14.319687] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:65:f3:22:8a:35
[   14.319689] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[   14.319733] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[   14.321075] e1000e 0000:00:19.0 eno1: renamed from eth0
[   14.407989] usb 3-12: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[   14.407991] usb 3-12: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   14.407992] usb 3-12: Product: USB OPTICAL MOUSE 
[   14.422042] hidraw: raw HID events driver (C) Jiri Kosina
[   14.438386] usbcore: registered new interface driver usbhid
[   14.438387] usbhid: USB HID core driver
[   14.442092] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/0003:1A2C:2124.0001/input/input5
[   14.487745] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   14.487807] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   14.491563] ata3.00: ATAPI: hp      DVD A  DS8ACSH, LHS3, max UDMA/133
[   14.492761] ata3.00: configured for UDMA/133
[   14.496683] ata1.00: ATA-9: KingFast, Q1124A0, max UDMA/133
[   14.496685] ata1.00: 703282608 sectors, multi 1: LBA48 NCQ (depth 32), AA
[   14.501322] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:14.0-11/input0
[   14.501679] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/0003:1A2C:2124.0002/input/input6
[   14.510634] ata1.00: configured for UDMA/133
[   14.510831] scsi 0:0:0:0: Direct-Access     ATA      KingFast         4A0  PQ: 0 ANSI: 5
[   14.511247] sd 0:0:0:0: [sda] 703282608 512-byte logical blocks: (360 GB/335 GiB)
[   14.511259] sd 0:0:0:0: [sda] Write Protect is off
[   14.511260] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   14.511300] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.511373] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.515809] scsi 2:0:0:0: CD-ROM            hp       DVD A  DS8ACSH   LHS3 PQ: 0 ANSI: 5
[   14.517923]  sda: sda1 sda2
[   14.518679] sd 0:0:0:0: [sda] Attached SCSI disk
[   14.561298] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/0003:1A2C:2124.0002/input/input7
[   14.561588] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:14.0-11/input1
[   14.561918] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12:1.0/0003:275D:0BA6.0003/input/input8
[   14.562311] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-12/input0
[   14.625828] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   14.625829] cdrom: Uniform CD-ROM driver Revision: 3.20
[   14.626424] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   14.626643] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   14.729820] checking generic (e0000000 1d5000) vs hw (e0000000 10000000)
[   14.729822] fb: switching to inteldrmfb from EFI VGA
[   14.729854] Console: switching to colour dummy device 80x25
[   14.730001] [drm] Replacing VGA console driver
[   14.730770] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.730771] [drm] Driver supports precise vblank timestamp query.
[   14.731180] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   15.077734] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[   15.078131] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   15.138761] fbcon: inteldrmfb (fb0) is primary device
[   15.214140] Console: switching to colour frame buffer device 240x75
[   15.234012] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.781023] raid6: sse2x1   gen() 11127 MB/s
[   15.849001] raid6: sse2x1   xor()  9089 MB/s
[   15.917000] raid6: sse2x2   gen() 15343 MB/s
[   15.985017] raid6: sse2x2   xor() 10296 MB/s
[   16.052997] raid6: sse2x4   gen() 18274 MB/s
[   16.120997] raid6: sse2x4   xor() 11363 MB/s
[   16.189008] raid6: avx2x1   gen() 24994 MB/s
[   16.257010] raid6: avx2x1   xor() 17164 MB/s
[   16.324998] raid6: avx2x2   gen() 29020 MB/s
[   16.393010] raid6: avx2x2   xor() 17919 MB/s
[   16.461016] raid6: avx2x4   gen() 33741 MB/s
[   16.529010] raid6: avx2x4   xor() 20433 MB/s
[   16.529011] raid6: using algorithm avx2x4 gen() 33741 MB/s
[   16.529012] raid6: .... xor() 20433 MB/s, rmw enabled
[   16.529013] raid6: using avx2x2 recovery algorithm
[   16.537456] xor: automatically using best checksumming function   avx       
[   16.658849] Btrfs loaded, crc32c=crc32c-intel
[   16.876664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   17.780708] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   17.797195] systemd[1]: Detected architecture x86-64.
[   17.800018] systemd[1]: Set hostname to <laserCNC>.
[   17.925432] systemd[1]: Configuration file /etc/systemd/system/eGTouchD.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[   17.945288] systemd[1]: Created slice System Slice.
[   17.945404] systemd[1]: Listening on fsck to fsckd communication Socket.
[   17.945479] systemd[1]: Listening on LVM2 metadata daemon socket.
[   17.945536] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   17.945614] systemd[1]: Listening on Journal Socket (/dev/log).
[   17.945674] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   17.971823] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   18.011004] lp: driver loaded but no devices found
[   18.020186] ppdev: user-space parallel port driver
[   18.126881] systemd-journald[414]: Received request to flush runtime journal from PID 1
[   18.214490] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
[   18.855018] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102)
[   18.855284] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   18.855542] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[   18.927228] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[   18.940125] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   18.944851] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   18.944853] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[   18.944854] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   18.944855] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   18.944855] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   18.944857] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   18.944857] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1b
[   18.947260] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   18.957851] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   18.965584] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   19.008233] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   19.013952] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   19.018644] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   19.023506] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   19.307225] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   19.307227] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   19.307228] RAPL PMU: hw unit of domain package 2^-14 Joules
[   19.307228] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   19.307229] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   19.352142] cryptd: max_cpu_qlen set to 1000
[   19.388415] AVX2 version of gcm_enc/dec engaged.
[   19.388416] AES CTR mode by8 optimization enabled
[   19.485980] kvm: disabled by bios
[   19.504253] input: HP WMI hotkeys as /devices/virtual/input/input18
[   19.539056] kvm: disabled by bios
[   19.612572] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   19.615261] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   19.620131] intel_rapl: Found RAPL domain package
[   19.620133] intel_rapl: Found RAPL domain core
[   19.620134] intel_rapl: Found RAPL domain uncore
[   19.620135] intel_rapl: Found RAPL domain dram
[   19.620137] intel_rapl: RAPL package 0 domain package locked by BIOS
[   19.620140] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   20.081542] gpio_ich: GPIO from 436 to 511 on gpio_ich
[   20.121509] usb 3-6: reset high-speed USB device number 2 using xhci_hcd
[   20.273481] mt7601u 3-6:1.0: ASIC revision: 76010001 MAC revision: 76010500
[   20.276584] mt7601u 3-6:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[   20.728675] mt7601u 3-6:1.0: Warning: unsupported EEPROM version 0d
[   20.728677] mt7601u 3-6:1.0: EEPROM ver:0d fae:00
[   20.813203] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   21.021396] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   21.031773] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   21.032371] usbcore: registered new interface driver mt7601u
[   21.036434] mt7601u 3-6:1.0 wlx502b73e1c6fa: renamed from wlan0
[   21.069885] IPv6: ADDRCONF(NETDEV_UP): wlx502b73e1c6fa: link is not ready
[   21.086578] IPv6: ADDRCONF(NETDEV_UP): wlx502b73e1c6fa: link is not ready
[   21.157263] IPv6: ADDRCONF(NETDEV_UP): wlx502b73e1c6fa: link is not ready
[   22.420394] wlx502b73e1c6fa: authenticate with 6c:70:9f:eb:9f:1e
[   22.435162] wlx502b73e1c6fa: send auth to 6c:70:9f:eb:9f:1e (try 1/3)
[   22.438803] wlx502b73e1c6fa: authenticated
[   22.441011] wlx502b73e1c6fa: associate with 6c:70:9f:eb:9f:1e (try 1/3)
[   22.444511] wlx502b73e1c6fa: RX AssocResp from 6c:70:9f:eb:9f:1e (capab=0x1411 status=0 aid=1)
[   22.468956] wlx502b73e1c6fa: associated
[   22.550347] wlx502b73e1c6fa: Limiting TX power to 30 (30 - 0) dBm as advertised by 6c:70:9f:eb:9f:1e
[   22.570634] IPv6: ADDRCONF(NETDEV_CHANGE): wlx502b73e1c6fa: link becomes ready

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 19:29 #164490 by PCW
6I24s normally use 5I24 firmware so you would specify 5I24 for mesaflash:

03:00.0 DPIO module: Device 2718:5124 (rev 01)

Please Log in or Create an account to join the conversation.

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 19:34 #164492 by owhite
Thanks so now I'm getting:
$ ./mesaflash --device 5i24 --readhmid
Checking file... OK
  File type: BIT file
Error: BootSector is invalid

is that progress? I guess I was suprised because lspci wasnt finding anything.

o

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 19:37 #164494 by PCW
That probably means you have an old version of mesaflash

I would build and install the current version:

github.com/jethornton/mesaflash

and try again

Please Log in or Create an account to join the conversation.

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 19:45 #164495 by owhite
one other question while I have you - I need to make custom bit files, and it looks like the latest documentation I could find on the subject was this tutorial .

is that still the latest approach?

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 19:58 #164497 by PCW
Yes though you would want

tom-itx.no-ip.biz:81/~webpage/emc/xilinx...14_install_index.php

and you should use the latest ISE (14.7)

Please Log in or Create an account to join the conversation.

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 19:59 #164498 by owhite
thanks I really appreciate how quickly you respond here.

Please Log in or Create an account to join the conversation.

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 20:07 #164500 by owhite
shoot I'm still getting BootSector is invalid.

Please Log in or Create an account to join the conversation.

More
18 Apr 2020 20:18 #164503 by PCW
Yuck
Are you sure you are using the new version (did you do a "sudo make install" ?)

Please Log in or Create an account to join the conversation.

  • owhite
  • owhite's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
18 Apr 2020 20:19 #164504 by owhite
yes. I deleted /bin/mesaflash, ran make and then
$ sudo make install

Please Log in or Create an account to join the conversation.

Moderators: PCWjmelson
Time to create page: 0.088 seconds
Powered by Kunena Forum