Board to replace built-in driver board on old zCorp 310 ZPrinter?
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23320
- Thank you received: 4946
29 Mar 2021 17:39 #204076
by andypugh
Indeed. We have one at work. It was quite expensive.
Replied by andypugh on topic Board to replace built-in driver board on old zCorp 310 ZPrinter?
Exactly what I want to print - molds for metal casting. It is possible to use a sand binder such as sodium silicate that binds sand for direct use for casting even molten steel. There are some large format sand printers on the market.
Indeed. We have one at work. It was quite expensive.
Please Log in or Create an account to join the conversation.
- aleksamc
-
- Offline
- Platinum Member
-
Less
More
- Posts: 567
- Thank you received: 65
05 Apr 2021 01:25 #204837
by aleksamc
Replied by aleksamc on topic Board to replace built-in driver board on old zCorp 310 ZPrinter?
At it's default linuxcnc doesn't have tools for retrofiting such machine.
You will need to make very big amount of work and develop your own printer based on HP inkjet card. So I think it's easier to find problem in your working one.
You will need to make very big amount of work and develop your own printer based on HP inkjet card. So I think it's easier to find problem in your working one.
Please Log in or Create an account to join the conversation.
Moderators: PCW, jmelson
Time to create page: 0.084 seconds