Mesa 7I96S + 7I85S Bitfile

Hello,
i need help to create a bitfile for the 7I96S. I would like the 7I85S to provide me with 3 encoder inputs and generate 3 Step/Dir.
the rest should be sserial.

I have already tried to create a bit file myself, but ISE 14.7 always gives me errors.

Greeting

The 7I85S can only have one sserial port

There is standard firmware for a 7I96S and a 7I85S:  7i96s_7i85sd.bit
 

OK thanks for the answer. but where can I get the bitfile. Is there a library in which all bit files are? Since I can't create one myself and I'm still very new. have no experience with linux cnc and mesa.

You can download them from our webstore

search for 7I96S
click on item
cllck on specification
click on support software

i think this is what i have already done but i got a big pack of bin and pin and ucf and vhd hostmod2 files. I see but no bit data. i think i'm doing something wrong. I think I'm being a little stupid

No you are not, it just takes a bit to get used to.
Unzip the downloaded archive, open the 7i96s folder, open configs, open hostmot2, there are a lot of files, find the one with this name: 7i96s_7i85sd.bit
Copy that file to your home folder, open a terminal and type :
sudo mesaflash --device 7i96s --addr 10.10.10.10 --write 7i96s_7i85sd.bit
After that finishes writing the firmware, type :
sudo mesaflash --device 7i96s --addr 10.10.10.10 --reload
That is it.
Be aware that i am typing this from memory.
P.S.
Changing the title to reflect the 7i96S as it states 7i69S